First, 175 ° C, 140 MPa series products
High temperature pressure insulation shell
Various sensing shells such as 70 /1503 /1515 /EILog /GY2000
High temperature pressure electrode tube
Various sensing electrodes such as 70 /1503 /1515 /EILog /GY2000
High temperature pressure insulated mandrel
Specifications: Ф10–Ф130ΧL
70 / 1503 / 1515 / EILog / GY2000 and other induction mandrel, the temperature is not deformed along the axis.
High-precision insulation ring / double lateral insulation ring technical indicators: 175 ° C, 140 MPa
Molded insulation tube
Specifications: outer diameter (Ф12.7-Ф100)Χ inner diameter (Ф15-Ф120)ΧL
L can be sized according to the user
Second, 200 ° C, 170MPa series products
High temperature pressure insulated mandrel
Specifications: Ф10 – Ф130ΧL
70 shell / 1503 shell / 1515 shell / / GY2000 shell
Induction coil support
Embedded electrode ring housing
Product features: The full length of the line expansion is within 0.05mm
Molded insulation tube
Specifications: outer diameter (Ф12.7-Ф100)Χ inner diameter (Ф15-Ф120)ΧL
L can be sized according to the user
3. Bonding of high temperature pressure-bearing composite insulator to metal body
Inductive bonded housing
Technical indicators: 175 ° C, 140 MPa
Product features: 17-4PH metal joints bonded at both ends, tested at internal pressure 10MPa, no leakage.
Bridle hard electrode
Technical indicators: 175 ° C, 140 MPa
Double lateral hard electrode
Technical indicators: 175 ° C, 140 MPa
DIL new instrument insulation shell
Technical indicators: 175 ° C, 140 Mpa
Micro-sweep long (short) shell
Technical indicators: 175 ° C, 140 MPa, insulation value ≥ 500 MΩ
Three-ring electrode
Technical indicators: 175 ° C, 140 MPa, insulation value ≥ 500 MΩ
200 ° C, 170 MPa, insulation value ≥ 300 MΩ
Standard electrode
Technical indicators: 175 ° C, 140 MPa, insulation value ≥ 500 MΩ
200 ° C, 170 MPa, insulation value ≥ 300 MΩ
Insulated joint
This product is suitable for various double lateral insulation joints.
Technical indicators: 175 ° C, 140 MPa
Insulated short section
Technical indicators: 175 ° C, 140 MPa
Absolute pressure insulated housing
Technical indicators: 150 ° C, 100 MPa / 165 ° C, 120 MPa
Specification: Φ60ΧΦ92ΧL
Φ62ΧΦ96ΧL
Φ72ΧΦ98ΧL
4. Composite materials resistant to hydrogen sulfide (H2S,) and carbon dioxide (CO2)
(put the picture in the same book)
Five, three-layer tube
Induction coil system connector assembly
Technical indicators: The three-layer pipe is tested at 175 ° C and 140 MPa, and assembled into an upper joint assembly and tested at 175 ° C and 140 MPa to meet the standard requirements.
Sixth, oil logging scale device
Array induction dial
Product features: good rigidity and light weight
LWD induction dial
Product features: good rigidity and light weight
(put the picture in the same book)
7. Reprocessing of the components of the petroleum logging instrument manufacturing
(put the picture in the same book)
Eight, other composite materials (glass fiber reinforced plastic FRP) profiles
(put the picture in the same book)
Nine, petrochemical chemical additives
Http://news.chinawj.com.cn
Submission:
FlexPRESS-600 is a flexible mounting press, With modular mounting unit design, and is combined With one base unit and 1 - 5 mounting units. Meet the different customer's specific needs
Modular design of mounting unit to meet customer`s specific needs;
Sliding closure with automatic open/close;
7-inch touch screen with max. 20 commonly procedures;
Pre-heating and per-press furcction to meet the specific mounting reguirement of different material;
Real-time display the temperature and pressure curve during curing;
Individual control of heating/pressing/cooling for every unit.
Mounting Equipment,Atm Metallurgical Mounting Press,Specimen Mounting Press,Compression Mounting Press
TROJAN (Suzhou) Technology Co., Ltd. , https://www.trojanmaterials.com