1, the bonding process:: surface treatment for different properties of the adherend and different conditions, surface treatment. Strictly can be divided into general methods, chemical methods and physical methods. In the decoration industry, it is mainly for the simple processing of the object to be glued. Such as: dust, oil, rough, moisture and other aspects to ensure that the surface is clean, dry, no oil.
2, the glued surface should be evenly coated to ensure wetting, to avoid the occurrence of bubbles as much as possible, due to the pores, the bond strength is greatly reduced, resulting in degumming. Should pay attention to the alignment position once, can not be moved, can be pressurized, remove the air, make it close contact.
3, the process of curing the adhesive through chemical and physical action, making the rubber layer solid. Curing is the last step in obtaining bonding performance and has a great influence on the bonding strength. During the curing process, temperature, pressure and time are three important parameters of the curing process. The change of each parameter has a direct influence on the bonding strength (each adhesive has a specific curing temperature and time), curing When applying a certain pressure, it should be said that it is necessary for all the adhesives, because the pressure is favorable for the diffusion and penetration of the adhesive, and it is in close contact with the adherend, which helps the exhaust body and water to avoid the generation of bubbles and pores. The glue layer is uniform and the position of the adherend is fixed. Whether it is chemical reaction or physical action to complete the curing of the rubber layer, it takes a certain time. In order to obtain the maximum bonding strength for curing, it is necessary to ensure sufficient curing time (this is usually required to make the adhesive for a certain period of time). Reach the final adhesion).
Ultra Plantâ„¢ Grow Light offers One Chip Technology aimed to meet your indoor growing expectation such as improve plants' quality, increase yield, or better the margin, etc., all for helping you realize a higher return on your crops.
Ultra Plantâ„¢ Grow Light is combined our advanced All-In-One technology with patented optical design and customized light full spectrum supported from our experienced LED engineers, plant specialists and other partners working on horticulture.
From Ultra Plantâ„¢ APP, you are able to schedule the growing process including photoperiod, brightness and spectral in advance. The lighting system will help you grow smarter, easier and better.
Ultra Plantâ„¢ is the most versatile horticultural grow lighting fixture for indoor plants with flexible full spectrum, brightness control and uniform, wider light distribution, suitable for top lighting of all types of crops. No matter it applies to anywhere for any crop, Ultra Plantâ„¢ can do perfect work for you.
High Power Grow Light,High Power Led Grow Lights,High Power Led Grow Light,High Power Grow Lights
Feton Corporation , https://www.ultraplantgrowled.com