The wind is blowing and the climate is dry, which makes many people feel uncomfortable. For solid wood furniture, it also faces the troubles of autumn dryness. After a summer of high temperature and damp heat, the summer and autumn alternate seasons, the body's body growth coefficient and water content will change drastically, causing cracking of wood. Once cracks are generated, it will not only affect the appearance, such as Failure to remedy in a timely manner can also affect the life of the furniture.
Recently, many readers have called to say that there is a crack in the solid wood furniture at home. Is there any way to remedy this problem? With this question, Xiaobian sends a “help†signal to the reader. Enthusiastic reader Xu Da Ge gave his solution, which is said to work well.
Xu Da Ge said that in general, solid wood furniture is inevitably bumpy during transportation and use, and with the constant change of water content, especially in the autumn, there are often some cracks in tables, chairs and cabinets. Prompt repair of cracked areas can prevent or delay the occurrence and development of these destructive phenomena, and extend the service life of solid wood furniture. In daily life, the following methods, I have tried many times, the effect is very good, you can quickly remedy the cracking problem of solid wood furniture through the following six steps:
Step 1: Prepare some used newspapers and cut them into scraps with scissors.
Step 2: Add an appropriate amount of alum to the paper dust and mix well.
Step 3: Pour the mixture of paper dust and alum into a previously prepared container, add a small amount of water, and stir again.
Step 4: Place the container on top of the simmer and cook into a paste. Stir constantly during cooking.
Step 5: Fill the cooked paste mixture into the cracks of the solid wood furniture and let it dry naturally.
Step 6: Use a paint pen or a special furniture repair pen to apply color to the fill area to match the color of the entire furniture.
The method described above is very simple and convenient, and the materials are very common. Friends in need can follow the above steps to repair cracked solid wood furniture step by step!
In addition, the weather is getting colder, and the following problems can be reduced in solid wood furniture to reduce the chance of cracking:
1, handling carefully, away from heat
The handling of solid wood furniture should be light, stable and flat. Try to avoid damage during the handling process, and place it in a stable manner. When it is not stable, add some cardboard or thin wood chips to make it stable.
Solid wood furniture should also be kept away from heat. The solid wood furniture of the lacquered surface should be protected from direct sunlight, because the strong ultraviolet ray will easily fade the lacquer surface and affect the appearance. Heating equipment such as heating and kerosene lamps are too close to deform the furniture. The contents of the kettle, tea stove, etc. placed on the solid wood furniture will cause it to "burn". If you place a hot metal container on a solid wood dining table, be sure to add a thermal pad.
2 common oil wax glazing
The daily cleaning of solid wood furniture is also very particular. Use a soft cotton cloth when wiping. The cotton cloth can be slightly damp, but it can't be wet. It can not be squeezed out of water, and should be wiped along the texture of the wood to avoid alcohol and other chemicals. Wipe with solvent or detergent to avoid corrosion of furniture paint and crack paint. In order to avoid the use of a period of time, the furniture will appear faint, faded and other phenomena, you can regularly wax the furniture and other corresponding treatment.
Insect Killer Lamp,Bl Tube,Bl Lamp,Bl Bulb
Changxing leboom lighting product CO.Ltd. , https://www.leboomuvd.com