Precautions for extending the life of rolling bearings

Source: China Bearing Network Time: 2013-03-09

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

In the process of using rolling bearings, due to improper operation; insufficient smoothness; rust and corrosion; and some other elements such as electric current; external data; partial pain, etc., the use of bearings is greatly reduced. Therefore, in the process of using bearings It is necessary to know and know the bearing preventive measures.
A. The bearing is not smooth enough:
Insufficient or improper smooth and smooth oil can cause component scratches or severe bearing deformation precautions: improve smooth system; punctuality to properly compensate or replace smoothing agent
B. Bearing operation is not standard:
Bearing assembly, operation or disassembly may lead to cage deformation or defect prevention measures: use appropriate operations, equipment and open things; and use Beijing Derui genuine bearings.
C. Bearing rust and corrosion:
Touching water can cause corrosion and rusting of bearing components. Bearings after rust damage can cause fall-off precautions during operation: check the seal regularly; ensure excellent sealing; properly store the bearing
D. Bearing current:
When the bearing is changed, the energization can cause grooves or nicks. When the bearing is stopped, improper grounding of the electrical operation will incur a slight burn precaution: reduce or prevent current from passing through the bearing after proper grounding before welding the components other than the bearing.
E. Bearing external data:
Abrasion particle contamination and debris intrusion can cause wear, abrasion and framing of bearing surfaces: Preventing intrusion of particles and debris; replacing smoothing agents; viewing sealing systems
F. Bearing pain:
Migraine, skew or excessive load can cause a few stress gathering or appearance shedding precautions: use accurate machining of the bearing housing and shoulder

Recommend to friends comments close window

Bearing related knowledge

NSK tapered hole bearing device uses SKF bearing to pay attention to the 10 good ways to distinguish genuine FAG bearing
Two smooth methods for NSK imported bearings
NTN bearing timing protection and routine inspection for the layout of extended life

This article links to http://
Please indicate the bearing network http://

Previous:The disposal of SKF imported bearings presents a pseudo-Brinell indentation image. The following is a brief introduction: The inspection of the thrust bearing device and device

Hammer Series

According to different hammer head shapes, hammers can be divided into ball pein hammers, sledge hammers, etc. According to different hammer head materials, they can be divided into carbon steel hammers, wood hammers rubber hammers, plastic hammers.

The specifications of the hammer are generally expressed by its mass, and commonly used are 0.25kg, 0.5kg and lkg.

American Type Hammer,Heavy Duty Hammer,Claw Hammer,Sledge Hammer

Rugao Yaou Import & Export Trade Co., Ltd , https://www.ntyaous.com