INA high-speed fine-angle touch ball bearing device

Source: China Bearing Network Time: 2013-08-30

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

INA high-speed fine-angle touch ball bearing; it is mainly used for high-speed rotating occasions with light load; high-precision bearing, high-speed, low-temperature low-rise oscillation and inevitable service life. It is often used as a support device for high-speed electric spindles; It is the key supporting part of the high-speed electric spindle of the internal and external surface grinding machine.
The service life of high-speed fine-angle touch ball bearings has a lot to do with the device; the following should be emphasized:
1. The bearing device should be carried out in a dust-free and clean room; the bearing should be carefully selected; the spacer for the bearing should be ground; under the premise of maintaining the height of the inner and outer ring spacers; the parallelism of the spacer should be controlled below 1um.
2. The bearing device should be cleaned before cleaning; when the inner ring slope is facing upwards; the hand is sensitive; there is no blockage; after drying; put a specified amount of oil; if the oil mist is smooth, a small amount of oil mist oil should be placed.
3. The bearing device should use special things; the force is even; the hitting is prohibited.
4. Bearing storage should be hygienic and ventilated; no corrosive gas; relative humidity should not exceed 65%; long-term storage should be regularly rust-proof.

Recommend to friends comments close window

Bearing related knowledge

Linear bearing
Class 0 deep groove ball bearings basic knowledge and skills analysis: rolling mill bearing protection and maintenance of imported bearing fault identification methods and paper machine bearing correction detailed solutions to the problems in the bearing protection skills

This article links to http://
Please indicate the bearing network http://

Previous: Matters to be aware of when using Lama to remove bearings Next: Preparations for bearing conventions

Stainless Steel LR SR Elbow

Stainless Steel Lr Sr Elbow,Steel Elbow,Ss Elbow,Stainless Steel 90 Degree Elbow

Zhejiang Jndia Pipeline Industry Co., Ltd. , https://www.jndiapipeline.com