Our company is here to give tips to customers on the use of heat transfer oil pumps, and hope that customers can see and use them in actual operation.
guide
The use of common sense can be used to extend the service life of the heat transfer oil pump. There are some heat transfer oil pump cooling methods: First, the double-faced machine seal: using cycle flushing, plus external cooling, the life is 1.5~2 times of the single end.
Second, single-end sealing: using injection flushing, the washing liquid is about 200 ° C minus two-line wax oil, the pressure is 0.05~0.15Mpa higher than the sealed cavity.
First, for high viscosity, medium containing a small amount of solid particles or medium with crystallization, there is a good effect. According to the above sealing structure, let us analyze the cooling of the following hot oil pump: the hot oil pump is provided with a cooling water jacket around the sealed chamber. Cooling with cold water can reduce the temperature of the sealed chamber to 200~250°C; for single-end sealing, use injection flushing, and clean the wax oil with a temperature of about 100 °C from the outside (generally no diesel, because diesel is the finished product) It not only reduces the temperature but also improves the working environment, which is an effective method. Details http://Phone
Http://news.chinawj.com.cn Submission:
Snap-Action Thermostat,Snap Action Thermostat,Snap Disk Thermostat,Nest 3Rd Generation Thermostats
LONG TERM ELEC. CO., LTD , https://www.longterm-hvac.com