In the decoration of the house because friends will encounter a problem that I do not know to be the first wallpapering or the first load switch, before the renovation certain steps need to figure out the correct fitting, then give us today is to bring the wallpaper paste Or first introduce the switch !
First install wallpaper or switch first
In the renovation of the house when the order is still very important, if the order is not easy to lead to rework, this is not only a waste of material but also a waste of time, so be sure to clear the correct steps before the renovation, then it is the first wallpaper or first loaded Switch? Many people are afraid that the wallpaper will be soiled, so the switch will be installed before the installation. If your decoration requirements are relatively high, you can first install the switch socket, the shop wallpaper will encounter the switch socket, the switch panel will be removed, the switch panel will be well after the wallpaper is sealed, and the ordinary decoration will not be available. So much stress.
Switch socket installation correct sequence
1. Switch socket base installation
Because the base of the switch socket is generally in the wall, the base is the first to install; pay attention to clean up the mud inside the clean, to avoid the subsequent installation of the panel when the dirty wallpaper has been attached.
2. Door and window installation
The cement and sand are used for the installation of doors and windows. In order not to soil the floor, doors and windows are also in front of the floor.
3. Floor installation
The reason why the floor is installed in front of the wallpaper is to prevent the dust from soiling the wallpaper when installing the floor.
4. Wallpaper
When sticking the wallpaper, it is necessary to cut a cross hole at the switch socket. In order to prevent the worker blade from scratching the panel, the switch panel is generally removed and then the wallpaper is attached.
5. Baseboard installation
Because the construction of the baseboard is relatively small, it is recommended that the wallpaper be properly attached and then installed so that the wallpaper can be attached to the end so that you don't have to worry about ugly or tilting.
6. Switch socket panel installation
The prominent switch sockets on the wallpaper will cause the wallpaper to wrinkle, and the effect of sticking out is not good; at the same time, it is difficult to close at the seam, so the panel of the switch socket is generally installed after the wallpaper is stuck;
The above is the first to bring you wallpaper or first installed switch , the correct order of decoration allows you to decorate it more easily, to avoid the inconvenience caused by rework, hope that the above introduction can help everyone, if you want to learn more about the relevant information , Please continue to pay attention to this site, more exciting so stay tuned!
Switch socket installation
Barbed Wire
Galvanized barbed wire is perfect for livestock fencing, security fencing, and barriers. It is uniformly zinc coated, which makes it corrosion-resistant and durable to use. Besides, it is easy to install, and can be used directly or mounted on top of the other mesh fencing to provide additional security. The various specifications and designs can meet most commercial, industrial, agricultural, highway, and other applications.
Barbed Wire,Electro Galvanized Barbed Wire,Hot-Dipped Galvanized Barbed Wire,Pvc Coated Barbed Wire
HENGSHUI YUZHENG IMPORT AND EXPORT CO., LTD. , https://www.yzironnails.com