The overall wardrobe sliding door is the most external design effect of the whole wardrobe. It is also the starting point for consumers to choose the wardrobe. But when we choose the whole wardrobe sliding door, what do we do? How do we choose the whole wardrobe? Let's move the door? Let's let everyone know about it.
Pick the whole wardrobe sliding door method:
First of all, there are many types of sliding doors. In the sliding door, the straight-track sliding door is the most widely used one, which can be applied to various areas, and the track form is divided into single rail, double rail and triple rail.
In addition, the corner sliding door is suitable for the corner area, which is divided into two types: external touch and inner touch. The angle of the angle of impact is divided into 90 degrees and 135 degrees.
Second, choose the wardrobe to see the panel and the border. There are carbon steel materials, aluminum-titanium alloy materials, etc., among which aluminum-titanium alloy materials are the most durable; secondly, the thickness of the door panel, the wooden board for sliding doors, it is best to choose 10mm or 12mm thick plates.
The frame of the whole wardrobe is made of aluminum-titanium alloy material, which is stable and durable when used. If the thickness is less than 8mm, it will appear thin and light; the door panel with a thickness of 6mm or less is easily deformed, which is difficult to meet the requirements of normal use.
Again, choose the wardrobe to move the door to pay attention to the track and pulley. The hardware of the sliding door is very important, which is mainly reflected in the design and manufacture of the pulley system and the track. The most important thing is the perfect combination of the two. A good track is better at the strength design and the smoothness of the contact surface with the pulley.
The service life of a whole wardrobe is the quality of the pulley. The sliding door usually achieves a height of 2.4 meters or more. The door leaf is wider and its own weight is very large. If the bearing capacity of the bottom wheel is not enough, the service life will be greatly affected.
The plastic pulley has a hard texture, but it is easy to be broken. It will become awkward and hard when used for a long time, and the push-pull feeling becomes very poor. The metal pulley has high strength, but it is easy to generate noise when it is in contact with the track; the fiberglass pulley is tough and resistant. Good abrasion, smooth sliding and durable.
Also, the wardrobe should be sealed. In order to ensure that the two doors are staggered and closed, all sliding door products will have a gap. The general external pulley requires a spacing of 15 mm, which affects the sealing of the sliding door. Although most products have tops, the gap between the tops and gaps of the different products is still relatively large. Try to choose products with small spacing and tight tops.
The above is the method I chose for you to choose the whole wardrobe sliding door. I hope I can give you some small reference. For more information, please stay tuned for the tracking report of Xiaojiaju.com.
OTHERS
Zhejiang Botuolini Machinery Co.,Ltd , https://www.chinaplungerpump.com