How to remove the dirt on the surface of the LCD splicing screen

There are many kinds of dirt on the surface of the LCD splicing screen. There are various kinds of dust, fingerprints and oil stains left by the user. Different methods are needed for different stains. If the dirt on the surface of the screen is handled carelessly, then It is possible to get a screen or a corroded screen. Now teach everyone how to properly remove the dirt on the surface of the LCD screen.

How to remove the dirt on the surface of the LCD splicing screen

Tools/raw materials

Dedicated LCD wiper; dedicated LCD splicing screen cleaner; one dry and soft towel; alcohol

Method / step

Clean up the dust on the screen surface. First of all, we can gently blow the screen with your mouth and gently blow off the dust on the screen. For the part of the dust that has not been blown off, use a special LCD wiper to gently wipe on the screen. When wiping, pay attention to the force, and do not use the force to wipe on the screen.

Clean up the fingerprint on the screen. To clean the fingerprint on the screen, you need to use a special screen cleaner and a special LCD wiper. First, we will put a special LCD splicer cleaner on a special LCD wiper, and then use a special LCD wiper. Gently wipe the area with the fingerprint, wipe it clean, and wipe the screen gently with a dry soft towel.

Clean up the oil on the screen. For alcohol, use a special LCD wiper with a little alcohol, then gently wipe it in the oily area, wipe it clean and wipe the screen with a dry towel. Do not touch too much alcohol, alcohol will have a certain corrosive effect on the screen, wipe the screen with a towel immediately after wiping it clean.

Clear the dirt on the surface of the LCD splicing screen

The selected towel should be anti-static, otherwise the towel and screen friction will easily cause static electricity, and the towel will easily leave a small amount of fiber or towel material on the screen.