The integrated wall is characterized by a strong three-dimensional effect and a concave and convex surface, which is a replacement for wallpaper and paint. Now people's decoration will choose to integrate the wall, because people pay more and more attention to personalization and environmental protection. Is there any integration board for the wall ? What are the characteristics of the integrated board ? The decoration of a home is good, mainly depends on the wall and the ground, so people are very interested in the decoration in this area. At this time, we need to understand some wall surfaces. Material decoration knowledge, today Xiaobian will come with everyone to look at the advantages of wall decoration integrated board and installation precautions
Features of the wall decoration integrated board:
1. Features of the integrated board - The laminated material is made of the short material of the solid wood into the required size and shape, so that the small material can be used greatly and the inferior material can be used.
2. Features of the integrated board - The material used for the integrated material removes wood defects such as knots and decay before bonding, so that materials with less defects can be produced. When fitting the board, the wood defects can be dispersed even if there are still wood defects.
3. Features of the integrated board - the laminated material retains the texture of the natural wood and looks beautiful.
4. Features of the integrated board - The raw materials of the laminated material are fully dried. Even for large sections and long sections, the moisture content of each part is uniform, and the cracking and deformation are small compared with the solid wood.
5. Features of the integrated board - superior to solid wood in physical and mechanical properties such as tensile and compressive strength and material quality uniformity, and can be adjusted according to the strength of the laminate to improve its strength performance. 1.5 times as much as solid wood.
6. Features of the integrated board - the laminated material can be manufactured into a straight shape and a curved shape as needed. According to the requirements of the corresponding strength, it can be manufactured into a cross-section gradual structure along the length direction, or can be manufactured into a cross-section laminated material such as an I-shaped shape and a hollow square.
7. Features of the integrated board - The laminated material is manufactured into a curved shape, which is an ideal material for wood structural members.
Note on wall decoration integrated board:
When installing, first cut the material according to the design size , cut the board into the required specifications , and the cutting edge must be straight. The back wall and the adhesive applicator decorative sheet, attention must be fully coated shoe, not tainted brush portion, the upper wall should advance good elastic pavement control line, compacted, to be dry and hard adhesives, silicon Si Glue seams or beading.
The decorative panel with the tongue and groove has a width of 90 mm or l65 mm and a length of 2440 mm. It should be used vertically when it is used . It should be cut according to the design size when it is installed. If it needs to be laid, it should be after the flower is cut. Cutting. Before installation, the wall and the back of the board should be painted with adhesive. The adhesive can be applied at the upper end, the lower end and the middle part . When the installation is done, the vertical counterpart is compacted . After the adhesive is dry , the wooden line is pressed to close the mouth.
After the wall decoration panel is installed , it is necessary to clean the extruded glue in time to prevent contamination of the board surface. The wall decoration panel can be used after installation , without the need for surface decoration such as varnishing. The base wall of the wall decoration panel is required to be flat, hard, clean and dry , and the relevant treatment method is the same as that of the wooden wall skirt.
Does the wall decoration board take a long time ?
Tiles are generally used. The so-called ceramic tiles are made of refractory metal oxides and semi-metal oxides, which are formed by grinding, mixing, pressing, glazing and sintering to form an acid-resistant porcelain or stone building or equipment.
The materials are always called tiles. Its raw materials are mostly made of clay, quartz sand and so on.
If the wall is not good, it will seriously affect our home life and mood. Not only that, the wall decoration should also take into account environmental factors, which will be beneficial to the environment and to our health. The above is the characteristics of the wall decoration integrated board introduced by Xiaobian today and the precautions during installation are finished here. For more information, please continue to pay attention to the decoration home network.
More related wonderful reading:
What are the advantages and disadvantages of the integrated board? Integrated board installation steps
Wall decoration integrated board features wall decoration integrated board shortcomings
Bamboo wood fiber integrated board offer bamboo wood fiber wall board advantages
What is a fir integrated board? Advantages and disadvantages of Chinese fir integrated board
Island Light is a type of Pendant Light commonly used over the central island in a kitchen or over a long table in a dining room. It typically has multiple bulbs to provide sufficient light to illuminate the entire area. Island Lights come in a wide variety of designs, ranging from traditional pendant styles to modern, industrial, or artistic designs. Island Lights not only provide light but can also serve as a decorative element in a room.
Island Light,Modern Pendant Lights For Kitchen Island,Island Light For Kitchen,Kitchen Island Pendant Lighting
Zhengdong Lighting Co., Ltd. , https://www.zdlightingfixture.com