1. Three months to add grease to the bearings of the vibration motor. In general, the amount of oil added is one-half of the bearing volume. If the vibrating motor hears an abnormal sound during operation, it should stop the operation immediately, check what is the fault, and then start the operation again after the problem is solved.
2. Generally speaking, the vibration motor should be repaired once within six months of operation. The main job is to clean the dust inside and outside the body, check the safety of the line, check whether the bolt is loose and the wear of the bearing. Also pay attention to the replacement of grease.
3. If you need to update the bearing, remember to buy the original bearing. When installing the eccentric block to adjust the vibration force, the inner side of the two sides is a fixed eccentric block, which must be coincident with the axial aspect, and then the outer adjustable eccentric block on the two ends of the shaft is adjusted to the same angle in the same direction to avoid the error. To stimulate the force. This can reduce the occurrence of accidents.
Concerned about surprises
Label: Three great tricks to maintain the vibration motor!
Previous: Common methods for chemical instrumentation in petrochemical industry Next: Maintenance measures for steam roller crusher
Painting Roller Set,Paint Roller Kit Lowes,Self Painting Roller,Best Paint Roller Set Uk
Jiangmen Nichiyo Decorative Material Co.,Ltd. , https://www.nichiyopt.com