Renewable Energy is energy from nature, such as solar energy, wind power, tidal energy, geothermal energy, etc. It is an inexhaustible source of energy. It is a relatively non-renewable energy source that will be exhausted. Energy sources.
Water energy
Hydroelectric power is mainly used for hydroelectric power generation.
The advantages of hydropower: no pollutant emissions, on-demand power supply, stable electricity prices, low operating costs, can help control floods, can be used to prepare irrigation water, improve river navigation and so on.
The adverse effects of hydropower: permanent ecological damage and land loss, downstream soil erosion, reduced irrigation water use, impediments to the migration of aquatic organisms, and reduction in the number and species of fish stocks.
2. Ocean energy
Including tidal energy, wave energy, current energy, temperature difference energy, and salt difference energy.
Advantages of ocean energy: Because of its potential for cleaning, it has less potential impact on the environment and it has potential for long-term carbon reduction.
Ocean energy use restrictions: Because it is in an early stage of development, it is unlikely to make a significant contribution in the short term.
3. Solar energy
Solar energy is widely used. Here we introduce solar photovoltaic power generation.
Photovoltaic power is low-carbon and environmental-friendly. After calculation, the installation of a photovoltaic power generation system of 1 square meter can reduce the use of 400 kilograms of standard coal, thereby reducing 1 ton of carbon dioxide, which is equivalent to 100 square meters of afforestation.
4. Wind energy
The potential of wind energy utilization is very large, clean and less polluting.
Wind power generation is the use of wind to drive the wind turbine blades to rotate, and then through the speed increaser to increase the speed of rotation, to promote the generator to generate electricity. The amount of wind energy reserves on the earth is very abundant. The energy that the world uses to burn coal every year is only 1/3 of the energy provided by wind within one year, and its power generation cost is closest to conventional energy.
Characteristics and Advantages
(1) Intelligent control design: adjustable main parameter and secondary parameter automatically according to the weight of door leaves;
(2) Low noise: Special static sound track, integration of motor, worm-gear and retarder.
(3) Anti-clamping function: automatically reverse when meeting barriers;
(4) Unique electronic motor lock: the motor will lock up when the door is forced to open.(controlled by remote or switch)
(5) Tighten force: seal door when closed, power consumption approximately 10W under standby;
(6) Advanced brushless motor(36V,100W) can automatically adopt different heavy door leaves;
(7) Bi-doors inter-locking: one of the door leaves always remains closing;
(8)Safety sensor terminal: sensor stops working when door closed;
(9)Unique coating technology: never rusty;
(10)Easy and convenient to install;
(11)Working Process: when the door leaf closes to the right place, the door leaf will slightly shift to the door frame and the ground. The rubbers on the four sides of the door leaf will completely combine with door frame and ground, which ensures air tightness. When the door is open, the rubbers will separate from door frame and ground, which avoids contraction on the ground.
Technical Specification
Specification |
Light Duty |
Heavy Duty |
||
Rang of the Door |
Single-Leaf |
Double-Leaf |
Single-Leaf |
Double-Leaf |
Door leaf max weight |
100kg |
100kg x 2 |
200kg |
200kg x 2 |
Mounting Method |
Surface mounting or built-in mounting |
|||
Open Width |
700-2000mm |
650-2000mm |
750-2000mm |
650-2000mm |
Power Supply |
AC 220v ± 10%, 50-60 Hz |
|||
Opening Speed |
300-500mm/s (adjustable) |
|||
Closing Speed |
250-550mm/s (adjustable) |
|||
Creep speed |
30-100mm/s (adjustable) |
|||
Hold-open time |
0.5-20s (adjustable) |
|||
Airproof Force (Max.) |
>70N |
|||
Manual Pushing Force |
<100N |
|||
Electronic Lock Force |
>800N |
|||
Power consumption |
150W |
|||
Ambient temperature |
-20+50 C |
Technical Details:
(1) Rubber lining sealing technology combined with V groove on the guide rail enables the door completely sealed when the door closed;
(2)Special door body location technology. Semicircular surface beam on the ground matches with the V style groove at the bottom of door leaf, which stop the door from swing and make sure it moves stable and smooth;
(3) The door body decorated with matte stainless steel or spray surface, and on the middle and both sides with sealing stripes to ensure the hermetic effect.
(4)Feet sensor switch applied to avoid contagion;
Stainless Steel Sliding Door,Stainless Steel Bypass Sliding Door,Stainless Steel Interior Sliding Door,Stainless Steel Folding Sliding Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.highspeedshutterdoor.com