The integrated ceiling is used in the parlor and the living room. Most of the houses are designed for such materials. Because the modern square tends to be smaller, the bedroom of the study room is more refined. If you use the integrated light, it will make it more convenient. The spatial distance becomes narrow and depressing, so it is recommended to install it in the living room and the dining room, the kind of connected space. The attention should be paid to the installation method of the integrated ceiling light and the need to prepare those necessary materials to better fix it. Integrated ceiling lights.
The installation of integrated ceiling lamps must be done in a good location, with good ventilation, and a lighting environment. It is also necessary to investigate the condition of the wall itself to prevent wall peeling during installation. The ceiling must be inspected before installation. It is best to use the operating platform when building and installing. Light steel skeletons are generally used as a protective measure in the ceiling. This is a preparation before the integrated ceiling light installation method.
Afterwards, the curvature of the ceiling, as well as the lampshade curtain box, as well as the different venting out of the structure can be handled to prevent the area of ​​the installation process from being insufficient and the distance from being unbalanced. In addition, in the integrated ceiling lamp installation method, it is necessary to prepare professional materials such as impact drills, toothless saws, necessary pools, dropped lines, screwdrivers, booms, etc. These are materials that need to be prepared before installation.
The installation process is divided into elastic lines, using professional tools to find the distance of the balance point on the wall, and use professional tools to make marks to facilitate the subsequent process operations. Then the main boom is installed, which is based on the original settings. A good location to locate, are installed can be positioned on the strip, and the metal plate is installed and fixed, to find the exact direction, and to be installed along the side of the position, in the metal plate fixation, we must tighten the keel Push it again and fix it.
The last is the cleaning work. Clean the dirty fingerprints on the surface. Then check whether each fixed part is stable and record the service life of each part.
Summary: The above is an introduction to the method of integrated ceiling installation. If you have a better suggestion, please contact Xiao Bian.
Ceilings Integrated ceilings Ceilings Design Spaces Houses Design Decorations Houses Windows Renovation Parlors Small dens Small bedroom dining room Ceilings Bedroom lights
Led Linear Lighting,Hotel Led Linear Batten Light,Led Flat Tube Lights,Ceiling Linear Light
Shen zhen SH LED Technology Co.,Ltd , https://www.pixellightsolutions.com