Of course, a small apartment is not as big as a big house. There is so much room in the bedroom for an independent cloakroom. As long as the mind is not down, the method is always more difficult than it is. Then, what kind of food will be used for cooking, and to use the available space. Such as bedside, bedside, etc., to make a cloakroom is also a special flavor. The side of the bed or the headboard is a common place for cloakrooms. Square or rectangular bedrooms can be arranged. It should be noted that the distance between the cloakroom and the bed should not be less than 1 meter, otherwise you may "can't get out of bed." If some positions are occupied by windows or doors, you can choose the position of the headboard, create a closet on the bedside, put some foldable clothes, etc., and it will be convenient to pick and place.
2 corners encountered it
In addition to the beds, there are corners that are also available. Since it is already impossible to make an independent cloakroom in another place, a corner-type cloakroom is set up at the corner, which can also act as a partition. Corner cloakrooms can be made taller and make upright cloakrooms so that they can store some off season clothing on the top of the wardrobe. The most important thing in the design of the cloakroom is the cleanliness. All kinds of clothing are clearly categorized.
3 There will be walking
Unavailable things are always the best. Small-sized units cannot make an independent cloakroom because of space restrictions. This is simply “torture†for girls. It was painful to think about it, but never to get it. There is a word called Extremism. When you walk through the hallway, you suddenly think of why you don't dig a closet in the corridor. This solves the cloakroom problem. It is necessary to choose to move the door, because it is inconvenient to open and close the wardrobe door in the corridor.
Cloakroom Decoration Small Size
Stainless steel Perforated Metal Mesh have higher precision compared with common weave mesh, the hole size is consistent, it is processed uniformly by machine, and have no broken wire, it is durable and environmentally friendly.
The metal mesh are widely used in food, medicine & pharmaceuticals, mining & metallurgical industry, construction, environmental protection industry, semiconductor, aerospace field and so on.
Perforated is also called perforated stainless steel plate and punching sheet.
Normally it is 400mm x 400mm, 500mm x 500mm, 600mm x 600mm, 800mm x 800mm, 1000mm x 1000mm one whole piece, the maximum dimension are able to made 1,2x1,2 meters one whole piece without welding. it can be cutted into pieces.
The thickness of the perforated sheet is different according to the hole size, normally the hole can be made from 50 micron to 100 mm.
If you have any other special requirement, we also would like to offer assistance and support.
Perforated Metal Net, Punching Plate, Perforated Mesh Plate, Stainless Steel Perforated Mesh, Perforated Sheet
Xinxiang Xin Ming De Machinery Co., Ltd. , https://www.xmdsieve.com