Shredder equipment routine maintenance tips

What are the tricks in the routine maintenance of the shredder? Gongyi City Yucheng Machinery here to introduce to you: shredder equipment regularly check the machine parts, once a month, check the worm gear, worm, the lubrication block on the bolts, bearings and other moving parts are flexible and wear conditions, found defects It should be repaired in time and must not be used recklessly. After the use of the shredder or when it is stopped, the rotary drum should be taken out to clean and brush the remaining powder inside the bucket, and then be loaded to prepare for the next use. If the equipment is out of service for a long period of time, the equipment must be wiped clean, the light surface of the parts coated with anti-rust oil, and covered with a cloth. Gongyi City Yucheng Machinery is a professional manufacturer of various types of shredder equipment, is your best choice.
For details, please contact: 1

Laser Cutting Ceramics

Cutting is an essential basic tool in the processing of ceramic components. Laser cutting technology has been favored for its non-contact, flexible, high efficiency and easy to achieve digital control. It is hoped that this high-energy beam processing method can be treated like metal materials. Complete the non-destructive cutting of ceramics. With laser as processing energy, the development potential in hard and brittle ceramic processing has been seen. It can realize contactless processing and reduce the damage caused by contact stress to ceramics. Ceramics have higher absorption rate for laser, focusing The energy of the high-energy laser beam acting on the local area of the ceramic can exceed 108 J/cm2, and the material can be melted and evaporated in an instant to achieve high-efficiency processing.

Laser Cutting Ceramics,Alumina Ceramic Substrate Sheet,Tobacco Laser Cutting Nozzle,Machinable Ceramic Filter

Dongguan Haikun New Material Co., Ltd. , https://www.nitrideceramic.com