N52 High Grade Neodymium Magnet with Block Shaped

Neodymium magnet:
Neodymium iron boron magnets can be divided into two types: bonded neodymium iron boron and sintered neodymium iron boron.The bond is in fact an injection molding, and sintering is a vacuum heating through high temperature molding.The neodymium iron boron magnet is a permanent magnet with the strongest magnetic force till now. Material grades have N35-N52.Various shapes can be processed according to specific requirements: round, square, punch, magnetic tile, bar, convex, trapezoidal etc.Despite these advantages, but the surface is easy to rust, so it is usually required to make a number of protective surface treatment:Nickel plating, zinc plating, gold plating, epoxy resin, etc.Ordinary NdFeB magnet suitable environmental temperature is below 80 degrees, but also has some ability to 200 degrees. Mainly used in electronics, electrical appliances, packaging, motors, toys, leather goods, automotive machinery, etc..     


Characteristics of Neodymium Magnet:
Neodymium iron boron magnet has the advantages of high cost performance and good mechanical properties.The deficiency lies in the fact that Curie's temperature is low, the temperature characteristic is poor, and the powder is easy to be corroded. It is necessary to improve the chemical composition and the surface treatment method to achieve the practical application.Neodymium iron boron belongs to the third generation rare earth permanent magnet material, which has the characteristics of small size, light weight and strong magnetic properties. It is a magnet with better performance and price than the best.
The advantages of high energy density make the neodymium iron boron permanent magnetic materials have been widely used in modern industry and electronic technology. In the state of bare magnetic, the magnetic force can reach about 3500 Gauss.
 






Property Chart Magnetization direction:
 





Plating and Test:





Our Quick Shippment:





Detailed Specification:







1.Size:Customized

2.Shape:Block


3.Grade:All kind of grade with N35 - N52, 35M - 50M, 35H - 48H, 30SH - 45SH, 
                                                 28UH - 40UH, 30EH - 35EH, 30AH - 33AH.

4.Raw Material:Rare earth Magnet

5.Coating:Nickel, Zinc, Blue Zinc, NiCuNi, NiCuNi+Epoxy,Gold, etc.

6.Lead Time:15-20 days

7.Packing:Carton(34x26x14cm)

8.Certificate:ISO9001,ROHS

9.Payment Terms:T/T,L/C,Paypal
Application:

Motor assemblies, Automobile,Wind generators,MRI,Speakers,
Sound Equipment Earphone microphone ,Sensor, Scanner, Camera Lens, 
Embedded Object,Magnetic separators, linear actuators, assemblies, servo 
motors, DC motors (automotive starters), Computer rigid disc drives

Base Seals

Base Seals are an important component used to seal machines and equipment. They are usually used to prevent liquid or gas leaks and protect machines and equipment from dust, pollutants, and other external elements. Base Seals mainly include rubber seals, oil seals, mechanical seals, O-rings, U-rings, V-rings, X-rings, and other types.

1. Rubber seal

Rubber seals are a type of seal widely used in various machines and equipment. They are usually made of rubber materials and have characteristics such as wear resistance, corrosion resistance, high temperature resistance, and low temperature resistance. Rubber seals are mainly used to seal liquids or gases in machinery and equipment, such as automotive engines, water pumps, pipelines, fans, refrigeration equipment, etc.

2. Oil seal

Oil seal is a type of seal specifically used to seal lubricating oil. They are usually made of rubber and metal materials and have characteristics such as wear resistance, corrosion resistance, and high temperature resistance. Oil seals are mainly used in equipment such as automotive engines, industrial machinery, water pumps, and hydraulic systems to prevent lubricant leakage.

3. Mechanical seal

Mechanical seals are advanced seals used to seal machines and equipment. They are usually made of metal and ceramic materials and have characteristics such as wear resistance, corrosion resistance, high temperature resistance, and low temperature resistance. Mechanical seals are mainly used in high-speed rotating equipment, such as centrifugal pumps, compressors, fans, centrifugal separators, etc.

4. O Ring

O-ring is a common sealing element, usually made of rubber material. They have good sealing performance and elasticity, and can be used to seal various liquids and gases. O-ring is mainly used in fields such as automobiles, machinery, and electronic equipment.

5. U-shaped ring

A U-shaped ring is a sealing element with a U-shaped cross-section, usually made of rubber material. They have good sealing performance and elasticity, and can be used to seal various liquids and gases. U-rings are mainly used in hydraulic systems, pneumatic systems, automotive braking systems, and other fields.

6. V-ring

A V-ring is a sealing element with a V-shaped cross-section, usually made of rubber material. They have good sealing performance and elasticity, and can be used to seal various liquids and gases. V-rings are mainly used in fields such as automobiles, industrial machinery, and hydraulic systems.

7. X-shaped ring

An X-ring is a sealing element with an X-shaped cross-section, usually made of rubber material. They have good sealing performance and elasticity, and can be used to seal various liquids and gases. The X-ring is mainly used in hydraulic systems, pneumatic systems, automotive braking systems, and other fields.

In summary, the Base Seals product category covers a variety of seals and can meet the sealing needs of various machines and equipment. Both automobiles, industrial machinery, and electronic equipment require the use of Base Seals products to ensure the normal operation of machines and equipment.

X Ring,O Ring,Ptfe Gasket,Back Up Rings

DG Zhongxingshun Sealing Products Factory , https://www.zxs-seal.com