At 19:27, fire officers and soldiers rushed to the scene and found that the fire was on the fifth floor of the building. Looking up, the fire in the room skyrocketed and smoke was coming out. He looked upstairs. After inquiring the homeowner and learning that there were no trapped persons in the house, the commander immediately organized 4 team members to wear air respirators and carry water hoses to quickly reach the fire floor, and quickly found the fire room. Some flammable debris such as wooden furniture was piled up, and there were no explosives. The firemen immediately opened the door, and the smoke quickly filled the entire corridor.
Fire officers and soldiers could not enter due to the smoky smoke, extremely high temperature, and heat waves hitting the surface. The on-site commander decisively issued a combat command: first cut off the room circuit, a group of people evacuated the people in the building, laid two main water guns vertically on the main line of the hose, and set up a water gun position on the fourth floor to control the fire to spread around and the next one was covered by the water gun Forcibly enter the room, quickly open the window to exhaust smoke. Immediately, the two water guns gradually entered the fire room under the cover of each other, and the water came out to suppress the fire parts of the room. After 15 minutes, the fire in the fire room was extinguished. After the efforts of the firemen and soldiers to fight, the fire was finally extinguished successfully, and the neighboring houses were kept, avoiding the "fire company" situation.
At present, the cause and loss of the fire are under investigation.
For more furniture information , go to http://news.gojiaju.com/
                                        Welcome to provide news interview clues Advertising / News Hotline Turn 8004
Copper nuts made of all kinds of embossed wire (usually lead brass, such as H59, 3604, 3602). Our daily contact with the embedded knurled copper nuts are processed by precision automatic lathes. The reference standard of embedded knurled copper nut comes from GB/T809, but the technical parameters of all kinds of embedded nuts produced by our company exceed the relevant indexes required by the national standard.
Knurling copper nut is mainly used for hardware Spring, shaped spring, craft gift spring, battery spring, spring antenna,key ring, phosphorus copper spring CNC automatic lathe turning parts (copper car parts, iron, aluminum car parts), metal stamping parts, electronic parts, iron shaft, single Rachel,Rachel, iron pin, non-standard Screw nut,fittings,fasteners, wire forming (wire card holder, Model aircraft landing gear, S hook, R latch, triangle buckle, D buckle) and other hardware products, belonging to the copper nut series.
Brass Nut,insert nut,knurled nut,injection nut,hex nut
Shenzhen Lanejoy Technology Co.,LTD , https://www.brassinsert.net