Water stop belt _ water stop difference


Water stop belt _ water stop difference

The difference between the waterstop and the waterstop is that the waterstop is often used for construction in temperature shrinkage joints, settlement joints, etc., and the waterstops are used in construction joints. From the point of view of function, the water stop belt is mostly made of rubber, and can only function as a water stop. The water stop strip is in the construction joint and will expand when it meets water, thereby functioning as a water stop.

1. The water stop strip is not the same as the water stop strip. The water stop strip can be made by adding the corresponding filler to the rubber.

2. The water-swellable rubber has superior characteristics and advantages compared with the general-purpose rubber. This kind of rubber produces 2-3 times expansion deformation after water contact, and fills all irregular surfaces, cavities and gaps of the joint, and at the same time generates huge contact pressure to completely prevent leakage. When the seam or the construction joint is displaced, causing the gap to exceed the elastic range of the material, the ordinary rubber water stop material loses the water stopping effect. The material can also be stopped by water swelling. The use of water-swellable rubber as a sealing and sealing material not only saves the amount, but also eliminates the characteristic of elastic fatigue caused by excessive compression of the general elastic material, so that the waterproof effect is more reliable.

China Hardware Business Network


The following Hengshui Yifeng Technology Co., Ltd. Xiaobian then introduce the difference between the water stop and the water stop:

After the water stop is expanded by water absorption, it can be in close contact with the concrete, and the gap in the concrete is blocked to achieve the water stopping effect. Because there are some unforeseen problems in the construction, the use of waterstops can avoid problems. The water stop strip is round and long, and the overall construction is simple. However, there are some situations to be noted when installing: First, the steel bar is dense, which makes the water stop bar difficult to install. Second, the time is long, and the water stop bar absorbs moisture and expands. The effect is not good; the third is that the construction joint is not flat, resulting in poor contact, these need to be considered during installation. Usually, the water stop strip is installed in the secondary part and the place where the requirements are not strict, and the water stop effect is slightly inferior to the water stop belt.

The water stop belt can be used with 651, 653 type water stop belts with widths of 200-350. The water stop effect is better, but it is not well controlled during installation. Once it is not well controlled, when pouring concrete, the waterstop can easily become unsatisfactory due to shock, which has a greater impact on the water stopping effect. The water stop belt is mostly made of rubber, so the whole is relatively soft, and it is easy to be deformed. It is not straight to the installation, and it is easy to be damaged by the lead wire. Some construction units feel troublesome and often prefer to use the water stop strip.

China Hardware Business Network


Our company specializes in the production of rubber waterstops, waterproof materials, bridge expansion joints, plastic blind ditch and rubber shock absorbers and other rubber products. If you want to know more about the product dynamics, please call 13785855258 Mr. Fu.
Http://news.chinawj.com.cn Water stop belt _ water stop difference

Fiberglass Fabric

Fiberglass fabric has gained significant popularity in various industries due to its exceptional strength, durability, and versatility. This fabric is made from woven strands of fiberglass, resulting in a lightweight yet robust material. With its high tensile strength and resistance to heat, chemicals, and abrasion, fiberglass fabric finds applications in a wide range of fields. It is commonly used in the construction industry for reinforcing concrete structures, as well as in the manufacturing of insulation materials, protective clothing, and composite materials. The flexibility and moldability of fiberglass fabric make it an ideal choice for creating custom shapes and structures, making it a valuable asset in numerous industrial and commercial applications.

Fiberglass Fabric,Glass fibers,Reinforcement

Jinwu Glass Fiber Co., Ltd , https://www.jinwuwindows.com