Specification:Â
|
Part Number |
Loop Type |
Reed Form |
Closed Gap [Inch(mm)] |
Depature Gap [Inch(mm)] |
Maximum Initial Contact Resistance (Ohm) |
Maximum Contact Rating (W) |
Maximum Switching Voltage (VDC/VAC) |
Maximum Switching Current (A) |
| BSD-3018 | Closed |
N/O |
2.75(70) | 2.85(72) | 0.20 | 10 | 100 |
0.5 |
| BSD-3018A | Open | N/C |
2.5(63) | 2.6(66) | 0.20 | 3 |
30 |
0.2 |
| BSD-3018C | Closed & Open | SPDT | 2.5(63) | 2.6(66) | 0.20 | 3 | 30 | 0.2 |
CE Sentek Longer Cable Available Magnetic Contact Switches BSD-3018
Dimension (mm):
Product Features:Â
Extude aluminum casings for harsh envrionments
Wire: #22AWG with 22" armored cable
Longer cable available on request
Switches or magnets are available separately
Jacket cable available:BSD-3018-J
Resistor, Diode and Supervisory Loop available on request
Company Information
Â
Specification:Â
|
Part Number |
Loop Type |
Reed Form |
Closed Gap [Inch(mm)] |
Depature Gap [Inch(mm)] |
Maximum Initial Contact Resistance (Ohm) |
Maximum Contact Rating (W) |
Maximum Switching Voltage (VDC/VAC) |
Maximum Switching Current (A) |
| BSD-3018 | Closed |
N/O |
2.75(70) | 2.85(72) | 0.20 | 10 | 100 |
0.5 |
| BSD-3018A | Open | N/C |
2.5(63) | 2.6(66) | 0.20 | 3 |
30 |
0.2 |
| BSD-3018C | Closed & Open | SPDT | 2.5(63) | 2.6(66) | 0.20 | 3 | 30 | 0.2 |
CE Sentek Longer Cable Available Magnetic Contact Switches BSD-3018
Dimension (mm):
Product Features:Â
Extude aluminum casings for harsh envrionments
Wire: #22AWG with 22" armored cable
Longer cable available on request
Switches or magnets are available separately
Jacket cable available:BSD-3018-J
Resistor, Diode and Supervisory Loop available on request
Company Information
Â
Thrust Spherical Roller Bearing
A spherical roller thrust bearing is a rolling-element bearing of thrust type that permits rotation with low friction, and permits angular misalignment. The bearing is designed to take radial loads, and heavy axial loads in one direction.
Spherical roller thrust bearings are of separable construction, The shaft washer is assembled with the cage and a number of asymmetrical spherical rollers and has to be used along with a housing washer having sphered raceway. During mounting, the rings are to be fixed on to their respective seats – shaft washer on the shaft and housing washer on to the housing and then they have to be put together carefully They are manufactured in multiple series.
The raceway of the housing washer is at an angle with it`s ais of rotation, so as to be able to allow the rollers to remain in touch with it. As a result, a spherical roller thrust bearing is capable of carrying both a radial as well as an axial load. Spherical roller thrust bearings – because of their internal geometry – are capable of accommodating certain amount of misalignment. However, they can take axial loads only from one direction, and may need to be used in pairs in Back-to-Back or Face-to-Face arrangement, if thrust load from both the directions are to be carried.
Spherical roller thrust bearings are capable of compensating misalignment and shaft deflection.
The bearings are manufactured in normal accuracy. However, bearings with higher running accuracy can also be supplied.
Thrust Spherical Roller Bearing,Single Direction Spherical Roller Thrust Bearing,Thrust Ball Bearings For Detector,Hardness Thrust Spherical Roller Bearings
Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.longsbearing.com