Tipper Truck Front-End Lift Hydraulic Oil Cylinder RAM Auto Parts

Introduction:
1. Features
acts on the piston to push the piston rod out. An external force is required to return the cylinder to the retracted position. A typical application for a single-acting cylinder is a lift truck, where the load of the fork pushes the cylinder back. Multistage cylinders (also referred to as telescopic cylinders) have two or more piston rods in a coaxial arrangement to achieve greater extended length compared to the retracted length.

system pressures up to 160 bar (2 300 psi)
temperatures up to 70 °C (160 °F)
rare pressure peaks in excess of system pressure
minimal side loads acting on guides
environment with moderate temperature fluctuations and relatively free of contaminants

2. Product show

3. Specification

Some  models and main technical parameters of single acting hydraulic cylinder hydraulic cylinder

                                                               Telescopic front end hydraulic cylinder
 

 

                   
Any types of model could be designed according to your requirement.
If you're interested in our products, please contact with us.

tip: 110 * 375 is two stage sleeve car cylinder, it is matching with garbage truck . The total length of 750MM, trunnion diameter of 50,the installation from the center of trunnion  to pin hole center is150mm, the inlet port in the trunnion, the thread size M20 * 1.5. Latching hole 30mm.

4. Processing Equipment
                      

5. Quality Control:
1. External Inspection: Purchased Item Inspection, Outsourcing Item Inspection
2. Process Inspection: First Inspection, Random Inspection, Handover Inspection
3. Final Quality Inspection: External Dimensions Inspection, 100% Hydraulic Test
4. Type Inspection
Every piece of hydraulic cylinder are tested and will send out only after they are pasted the each test.
Our company has abundant technical force and perfect testing means. By making wide technical and business cooperation with many related enterprises, universities, colleges and institutes both at home and abroad, and employing senior engineers and software engineers, we have greatly strengthened and improved our designing, processing, and testing abilities.

6. FAQ:
1.Are you a manufacturer?
We are professional manufacturer in hydraulic. We will provide competitive price.

2.What is your warranty?
Our products are all available for one-year free warranty and product lifetime consulting service.

3.How to ship your products?
We are transported by sea, by air or by international express.

4. Do you support OEM service?
Yes. OEM service is available.

5. Is your design reasonable?
We have professional R&D team with rich design experience.

 

 

 

Introduction:
1. Features
acts on the piston to push the piston rod out. An external force is required to return the cylinder to the retracted position. A typical application for a single-acting cylinder is a lift truck, where the load of the fork pushes the cylinder back. Multistage cylinders (also referred to as telescopic cylinders) have two or more piston rods in a coaxial arrangement to achieve greater extended length compared to the retracted length.

system pressures up to 160 bar (2 300 psi)
temperatures up to 70 °C (160 °F)
rare pressure peaks in excess of system pressure
minimal side loads acting on guides
environment with moderate temperature fluctuations and relatively free of contaminants

2. Product show

3. Specification

Some  models and main technical parameters of single acting hydraulic cylinder hydraulic cylinder

                                                               Telescopic front end hydraulic cylinder