Solid wood floor maintenance methods

Brand shop: Kojima solid wood flooring

1. Keep the floor dry, clean, and avoid contact with large amounts of water. Do not scrub with alkaline water, soapy water or other corrosive liquids to avoid damaging the paint film. Wipe with a wrung cotton mop. Do not wipe with wet mop, gasoline, flammable materials, or hot liquids.

2. Beat the wax at intervals, depending on the finish of the floor finish. The method is to first wipe the floor with a semi-dry rag and wax it. Apply it evenly to the surface of the floor and allow it to “saturate”. After slightly drying, wipe it back and forth on the floor with thousands of soft cloths until smooth and bright.

3. If you accidentally pour or leave water on the ground, you must clean it with a dry soft cloth in time. After cleaning, you can't let the sun directly or use the electric oven to bake, so as not to dry too fast. Cracked floor.

4, the floor after the pavement should be reduced to the sun as much as possible, in order to avoid the paint by UV irradiation too much in advance chapped and aging.

5. Don't throw cigarettes or matches and other types of fire on the floor so as not to scorch the floor surface; avoid sharp and sharp objects and heavy items for long periods of time.

6, if the floor is not covered in long-term residence, it is necessary to open windows for ventilation. Do not cover it with plastic sheets or newspapers. For a long time, the paint film will be sticky and lose its luster. At the same time, avoid high temperature objects directly touching the floor. If the indoor air humidity is lower than 40%, it is necessary to appropriately increase the temperature. If the humidity is greater than 100%, measures for dehumidification must be taken.

important hint:

1. The trapped solid wood floor is a semi-finished product. Consumers are required to strictly inspect and confirm the construction environment quality of the flooring product prior to installation. Otherwise, the company has the right not to accept the quality problems caused by the construction and installation.

2. Park China is located in the subtropical area. Distinct four seasons, distinctly wet and dry, may cause slight expansion, contraction, or distortion during use, which is a normal phenomenon.

Floor purchase paint window

Macor Ceramics

Glass ceramics, also known as glass-ceramics, are a composite of a combination of crystalline phase and glass that has been produced by high temperature melting, forming, and heat treatment. It has excellent mechanical strength, thermal expansion performance, thermal shock resistance, chemical resistance, low dielectric loss and other superior properties.Glass ceramics are widely used in machinery manufacturing, optics, electronics and microelectronics, aerospace, chemical, industrial, biomedical and construction. Due to the complicated manufacturing process and high technical requirements of the glass ceramic panel, the high-quality glass ceramic production process and control technology are basically monopolized by foreign countries. Therefore, the domestic glass ceramic production process has problems of poor quality and low yield.

Macor Ceramics,Machinable Glass Ceramics,Glass Ceramic Round Disc,Machinable Glass Ceramic Tube,Glass Alumina Ceramic Block

Dongguan Haikun New Material Co., Ltd. , https://www.hkceram.com