Subsequently, the quality inspection departments of major furniture manufacturing provinces such as Beijing, Liaoning, Shanghai, Sichuan, etc. have also carried out a comprehensive renovation of the furniture industry in various regions, and a "quality supervision storm" of furniture quality has successively hit. The focus of discussion in the industry. All along, the national quality and technical supervision departments have attached great importance to the quality inspection of the furniture industry in various places. The quality random inspection of the furniture industry has not been interrupted. During the frequent random inspection, some small furniture workshops that violated the regulations and were produced and operated were Investigate or be ordered to rectify.
At the same time, the environmental protection issues of the furniture industry have also become the focus of attention of relevant departments. The quality and technical supervision departments of various regions said that although the supervision has been very strong, many problems in the furniture industry still have many difficulties to solve at present, requiring time segmentation Breaking through, the most prominent one is the inherent defect of the furniture industry-"formaldehyde problem", because in the furniture industry, especially the panel furniture industry, artificial board is the main substrate, such as plywood, blockboard, particle board, MDF, etc., these boards are made of wood scraps and scraps, and it is inevitable to use urea-formaldehyde resin glue in the production.
And this kind of glue will release free formaldehyde, it is easy to cause the phenomenon of product formaldehyde exceeding the standard. Since there is currently no better adhesive to replace urea-formaldehyde resin glue, the formaldehyde problem has also become the most troublesome "illness" in the furniture industry.
Although the country has issued a series of industry standards for this purpose, for example, furniture companies must comply with the national standard: use E1 grade plates with a formaldehyde emission of ≤1.5mg / L, or must undergo surface treatment to use indoor formaldehyde emission of ≤5.0mg / L's E2 grade sheet, at the same time promulgated the highest domestic standard green certification authorized by the State Environmental Protection Administration-"Ten Ring Certification", but the problem continues to arise. Since the current environmental standards of the furniture industry in the country are not very uniform, some companies that do not have professional knowledge, backward production equipment, and insufficient funds have taken the opportunity to forge fake environmental protection products or green product certificates through various channels and sell them in the market. Products to deceive consumers. These problems will become the focus of industry remediation in the future.
In recent years, disputes and personal injury incidents due to furniture quality problems have constantly appeared. It is understood that most disputes have not been effectively resolved, and even many consumers have not actively defended their rights and interests because of fear of trouble. All adopt low-key cold treatment. Many consumers do not know, in fact, regarding the quality of furniture, the country has already had mandatory national standards. In 2004, the General Administration of Quality Supervision, Inspection and Quarantine and the National Standardization Management Committee jointly issued the "Furniture Instructions". It is clearly stipulated that furniture produced after October 1, 2004 must have instructions for use. However, there is still a certain degree of consumer complaints in furniture consumption. The production and sale of furniture by merchants shall be carried out in strict accordance with national regulations, and the "Furniture Instructions" shall be guaranteed, and the instructions shall be followed to ensure consumers' right to know.
Experts in the industry therefore remind consumers that when buying or customizing furniture, they should first read the "Furniture Instructions", especially during the acceptance, they should be obtained according to law and carefully compared. For those who do not have "Furniture Instructions", consumers can refuse acceptance and complain to the consumer protection committees at all levels. In addition, consumers are better off buying furniture at well-known stores. There is a guarantee.
The "Quality Supervision Storm" in the furniture industry continues, and the storm is not clear when the industry is unclear, and the efforts of the quality technical supervision department are only one aspect. It also requires furniture merchants to improve their integrity awareness and ensure the quality of furniture. Consumers must also learn to protect their rights. Only when all three aspects are completed and achieved can the standardized development of the furniture industry and the improvement of furniture quality be truly realized.
For more furniture information , go to http://news.gojiaju.com/
                                        Welcome to provide news interview clues Advertising / News Hotline Turn 8004
Key benefits of high PPE plant lights include:
1. Provide high-quality light: High PPE values ensure that plants can make full use of light energy, promote photosynthesis and growth and development.
2. Energy saving and environmental protection: LED technology has the characteristics of high efficiency and low energy consumption, which can save energy compared with traditional plant lamps.
3. Long life: LED lamps have a long life and can be used for thousands of hours, reducing the frequency and cost of replacing lamps.
4. Adjustable spectrum: High PPE plant lights can adjust the color and intensity of light to adapt to the needs of different plants at different growth stages.
5. Easy to install and use: High PPE plant lights usually adopt plug type design, easy to install, and can be flexibly used in indoor planting environment.
led grow lights with high photosynthetic photon flux density have the following effects on crops:
Promote photosynthesis: indoor growth led lights with high photosynthetic photon flux density can provide sufficient light energy to promote photosynthesis of crops. Photosynthesis is the basis for plant growth and development and is capable of synthesizing organic matter and producing energy. Therefore, high-light intensity led lights grow can increase the photosynthetic efficiency of crops and promote their growth.
Increase growth rate: ir growth led lights with high photosynthetic photon flux density can provide enough light energy to enable crops to carry out adequate photosynthesis, thereby increasing their growth rate. Photosynthesis is a key process for plant growth, and led grow lights with high photosynthetic photon flux density can provide enough light energy to enable crops to photosynthesize faster and promote growth.
Improve yield and quality: grow led light with high photosynthetic photon flux density can provide enough light energy to enable crops to carry out full photosynthesis. Photosynthesis is the process by which plants synthesize organic matter, and growth led light with high photosynthetic photon flux density can provide enough light energy to enable crops to synthesize more organic matter, thereby increasing yields. At the same time, growth led lights with high photosynthetic photon flux density can also provide a suitable spectrum and photoperiod, which also has a positive impact on the quality of crops.
led grow light full spectrum,light led commercial grow light for indoor plants,light the best led grow light for indoor plants
Shenzhen Pvison Technology Co., Ltd. , https://www.pvisunggrowlight.com