| Name of product | specification | Materials | Origin | price | Than yesterday | Compared to last week | Than last month |
| Common line | Φ8mm | Q235 | Water Steel | 3720 | 0 | 180 | 190 |
| Common line | Φ8mm | Q235 | Dagang | 3600 | 0 | 220 | 240 |
| altitude | Φ6.5mm | Q235 | Ping Gang | 3800 | 0 | 380 | 380 |
| altitude | Φ6.5mm | Q235 | Heavy steel | 3800 | 0 | 380 | 380 |
| altitude | Φ8mm | Q335 | Wine and Steel | 3800 | 0 | 410 | 410 |
| Rebar | Φ12mm | HRB335 | Water Steel | 3900 | 0 | 200 | 200 |
| Rebar | Φ14mm | HRB335 | Water Steel | 3850 | -20 | 170 | 210 |
| Rebar | Φ16-25mm | HRB335 | Water Steel | 3690 | -10 | 170 | 240 |
| Rebar | Φ16-25mm | HRB335 | Degang | 3660 | 0 | 170 | 250 |
| Grade III rebar | Φ16-25mm | HRB400 | Water Steel | 3770 | 0 | 190 | 260 |
| Grade III rebar | Φ16-25mm | HRB400 | Degang | 3740 | 0 | 180 | 230 |
| Hot rolled plate | 2.75*1250*6000mm | Q235 | Pangang | 4500 | 0 | 80 | 130 |
| Hot rolled plate | 3.0*1250*6000mm | Q235 | Pangang | 4480 | 0 | 80 | 130 |
| Hot rolled plate | 4.75*1250*6000mm | Q235 | Pangang | 4380 | 0 | 120 | 170 |
| Hot rolled plate | 6.0*1250*6000mm | Q235 | Pangang | 4350 | 0 | 150 | 200 |
| Hot rolled plate | 5.5*1500*6000mm | Q235 | Handan Iron and Steel | 4300 | 0 | 120 | 170 |
| Hot rolled plate | 6.0*1250*6000mm | Q235 | Wine and Steel | 4250 | 0 | 130 | 180 |
| Cold rolled plate | 1.0*1000*2000mm | Q195 | Pangang | 5350 | 0 | 50 | 50 |
| Cold rolled plate | 1.2*1000*2000mm | Q195 | Pangang | 5300 | 0 | 50 | 50 |
| Cold rolled plate | 1.5*1000*2000mm | Q195 | Pangang | 5300 | 0 | 50 | 50 |
| Cold rolled plate | 1.0*1250*2500mm | Q195 | Wu Gang | 5400 | 0 | 50 | 50 |
| Cold rolled coil | 1.0*1250*2500mm | Q195 | Kunming Steel | 5180 | 0 | 50 | 50 |
| Puzhong board | 8mm | Q235 | Liu Gang | 4700 | 50 | 170 | 220 |
| Puzhong board | 12-20mm | Q235 | Liu Gang | 4400 | 70 | 150 | 200 |
| Puzhong board | 12-20mm | Q235 | New Steel | 4380 | 50 | 130 | 180 |
| I-beam | 25# | Q235 | Wu Gang | 3730 | 0 | 0 | 0 |
| I-beam | 36# | Q235 | Lai Gang | 3900 | 0 | 0 | 0 |
| Channel steel | 16# | Q235 | Liu Gang | 3370 | 0 | 0 | 0 |
| Channel steel | 25# | Q235 | Heavy steel | 3550 | 0 | 0 | 0 |
| Angle Steel | 50*5mm | Q235 | Kunming Steel | 3360 | 0 | 40 | 40 |
Gravel Pump
MG series gravel pumps are designed for continuously handing the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. The pumps are suitable for delivering slurries in mining, explosive sludge in metal melting, dredging and so on. The advantages of the pump are easy installation and operation, good performance of NPSH and abrasion resistance. Our MG pump is including: Sand Pump , Dredge Pump , Sand Suction Pump, Coarse Sand Pump, Pulp And Paper Gravel Pump, Sugar Beet Handling Gravel Pump.
Product Features:
-Single casing
-Wide wet-passage
-Wear resistant metal wet end part, long service life
-Discharge direction can be oriented at any degrees
-Good performance of NPSH
Application Range:
Size: 4 inch to 14 inch
Capacity: up to 4320 m3/h
Maximum head: up to 80m
Gravel Pump,Sand Dredging Pumps,Transfer Slurry Pump,Lime Grinding Slurry Pumps
SHIJIAZHUANG MUYUAN INDUSTRY & TRADE CO., LTD. , https://www.cnmuyuan.com