Waterproofing is one of the key points in home improvement. If waterproofing isn't done at home, it not only brings a lot of trouble to your life, but also brings great losses to other owners. Then, how long will it take to waterproof after waterproof construction? How do you handle ceramic tiles after waterproof construction? Let's take a look at these two issues related to waterproofing today.
How long can you do waterproofing tiling?
The area of ​​home improvement that needs waterproofing is the kitchen, bathroom, and balcony. Because these three areas are the places with the largest amount of water consumption, how long will it take for the concrete to be waterproof ? The general home improvement and waterproof decoration definitely requires a process. Normally, the waterproofing process is about 3 days after the tiles can be tiled. The specific construction process for waterproofing has the following 3 steps:
1. First of all, the surface of the ground should be well-organized, waterproof paint should be mixed with waterproof paint, and the area that needs waterproof construction should be painted twice. This can take about half a day to one day;
2. Second, after applying the waterproof layer, wait for the waterproof coating to dry. In this waiting process, conservation is still needed and it takes half a day.
3. Finally, do a waterproof layer test to test its waterproof effect, and use a closed water test to do 24-48 hours.
How to deal with ceramic tile after waterproof construction
Tiles are not firmly bonded and the waterproof layer is not affected by water penetration. Therefore, apply cement mortar on the back of the tiles before applying the tiles. If there is no waterproof layer, the moisture of the cement mortar will absorb the dry, resulting in the tile is not firmly attached, if there is a waterproof layer, the moisture of the cement mortar will not be absorbed, so that the slower drying will be better fixed. So, how to do if the tiles are not secure? Here are three ways to solve them, as follows:
1. Strictly apply the waterproof coating in the correct proportion. When the coating is done on the surface, or after the waterproofing is done, use the cement to “pile the hair†and start tiling.
2. The tile sticking method, there are two main sticking methods, namely with cement mortar and tile adhesive. Do not apply too much cement mortar, leaving gaps between bricks and bricks; if you are using tile adhesive, there is not much attention to detail, because the viscosity of tile adhesive cement mortar is several times.
3. The last method, which is to reduce the tile on the wall, although the tile on the wall is more beautiful, good clean, can be laid over a large area, it will inevitably occur in an unstable situation.
Xiao Bian Summary: How long can you apply waterproof tiles ? How do you handle tiles that are not waterproof after waterproof construction? Friends who have these questions or want to understand these issues can read the above contents. If you want to learn more about the decoration information, please pay attention to this site.
Naips carries a large selection of Emergency Exit Sign Light for your option. Patterns can be customized and replace.
Emergency Exit Light,Led Exit Signs,Neon Exit Sign,Emergency Exit Sign Light
Foshan Nai An Lighting Electric Co.,ltd , https://www.articalight.com