Tiles in the home decoration is relatively easy. We learned that we can do it ourselves. The key is to save labor costs. A total of six steps: grassroots processing → elastic line → pre-shop → paving → jointing → cleaning.
TOSO ceramic pottery ceramic
(1) Primary treatment: Dust and debris should be thoroughly cleaned, and there should be no defects such as emptying, cracking, and sanding.
(2) Stretching line: Before the construction, pop up the control line at the height of the wall, and pop up the cross line on the floor to control the floor tiles.
Space size.
(3) Pre-paving: First of all, we should strictly select the color, texture, and surface smoothness of the floor tiles based on the drawings design requirements, and then pre-shop according to the drawings. The size, color and texture errors that may occur in the pre-paving are adjusted and exchanged until the best effect is achieved, and the paving is smoothly stacked and stored.
(4) Paving: laying 1/3 dry cement mortar, mortar thickness of about 25mm. Before the tile is applied, the back of the tile shall be wetted. Place the tiles on the cement mortar as required and tap the tile finish with a rubber mallet until the flatness is reached.
(5) Stitching: Clean the joints 24 hours after the tiles have been laid, wipe the impurities in the gaps in the tiles before jointing, and use a special joint sealant.
(6) Cleaning up: During the construction process, the surface of the floor tiles should be cleaned with cotton and other materials after completion (usually after 24 hours).
Links: Decoration Selected lighting The following three points you considered?
Tile paving tile entrance decoration cement home decoration decoration design home lighting decoration home
Prefabricated House,Steel Structure Co., Ltd. , http://www.wfsteelstructure.com