Calculation of standard pinion cutter modified short pinion cutter

In mechanical repair, short tooth inner ring gears are often encountered. The modulus of the gear, the root height and other parameters are consistent with the parameters of the standard gear. Only the height coefficient h (?) = 0.6 of the tooth tip is inconsistent with the height coefficient of the top of the standard gear, so that it cannot be processed with the standard gear shaping cutter. For this reason, we use the old standard gear shaping cutter to repair the grinding (only grinding the outer circle and the rear corner) for good results.

Coated Abrasive

Coated abrasives have a wide variety of applications, from grinding applications toLook, one class is the manual use of varieties (sheet emery cloth, sandpaper andPartially rolled sandpaper); The other is for mechanical processing varieties(mainly belt, disc, wheel and ring).

1, large flat surface polishing, steel plate, plywood, leather.

2, mass production of workpiece surface sanding, printed circuit board, steel

Piano board, wooden furniture, etc.

3. Continuous polishing and grinding of metal strip. (Strip width ok

Above 1200mm, length is unlimited)

4, forming grinding and polishing of complex surface work.

5, all kinds of diameter metal tube, rod, roller cylindrical grinding and large diameter

In 25mm container, internal circular grinding such as: cylinder, hydraulic cylinder oil tank

And so on.

6, the page wheel and sand ring can replace polishing cloth wheel, realize polishing process automation.

7. Sand plate is used for grinding welding seam of large shell, box body and hull

Burr, paint, etc.

Coated Abrasive,Flap Wheel,Sanding Paper,Sanding Belts

Henan Jinlun Superhard Material Co., Ltd , https://www.jlsuperhard.com