In today's growing popularity of the overall kitchen, cabinet goods from the material texture, performance to design, but also have their own changes in fashion trends. High science and technology, new materials, new processes and new design concepts have not stopped updating or overturning.
Of course, health, environmental protection and excellent quality are also essential factors. Although many products are not the same surface, similar style, similar color, but there is too much difference in the internal quality. In addition to the selection of cabinets, the quality of cabinets produced by professional manufacturers using automated mechanized production lines and hand-workshop-style small plants are also different. How should consumers choose?
One is to look at the edge seal of the sheet. The edge of the cabinet with the highest quality cabinets is exquisite, lubricated, hand-feeling feeling is good, the sealing line is lubricated and the joints are delicate. The professional manufacturers use a straight edge edge sealer to complete the construction sequence of edge sealing, decapitation, trimming, chamfering, polishing, etc. at a time. The adhesive is evenly applied, and the pressure of the edge-sealing pressure is firm, and the precision of the processing size can be adjusted to the most appropriate position. To guarantee the most accurate size. The workshop-style small factory uses a brush to apply glue, artificially presses the edge seals, uses a guillotine knife to trim the edges, and polishes with a manual polisher. Because the pressure is uneven, many places are not strong, and formaldehyde and other harmful substances are formed. The gas evaporates into the air.
The second is to look at design work. The countertops of the best quality cabinets are generally designed with a front retaining edge, that is, the edge is arched to prevent the water from dripping down; below the edge of the countertop, there is also a sink, which is in the form of a ditch, which is equivalent to that of the tile house. Eaves; reinforcement bars are generally added to the top cabinets to strengthen the main body of the cabinet to allow gravity to avoid shape changes. The poor quality cabinets mostly lack the processing of these details; in addition, it is necessary to check whether the glideslope is not smooth or loose, and whether the bucket joints are even.
The third is to look at paint. Professional manufacturers generally use high-gloss paint technology, the means to identify such paint is also very simple, can take their samples under the lights, see the light projection on the sample board is not clear, that is, if you choose the best quality The paint is able to be used as a mirror; in addition, good paint wear resistance, easy to clean, you can try to use one end of the ballpoint pen holder, scratch on the sample board, and wipe the scratches with clean paper, Can you remove it?
For example, for working-class families, the house is bought by loans, more than 80 square meters, all of the furniture supplies, they all think about the typical style of looking good but stylish, to a certain extent, have a value of goods. Of course, healthy and green materials are also necessary. Because of economic conditions, these furniture will never be replaced in the next few years, as are cabinets. This idea is exactly the same as that of many consumers. This is also a key momentum in the industry of the home industry. The style has become the first choice.
Cabinet to buy building materials knowledge villa design paint furniture home furniture home cabinets
Standard:
ANSI B16.5,ANSI B16.47,ANSI B16.48, ANSI B16.36, MSS SP-44
Size: 1/2''~60''
Class Rating: 150~2500
Facing: RF(raised face);FF(flat face);RTJ(ring type joint);RJ(ring joint face)
TG(tongue and groove face);MFM(male and female face)
Manufacturing process: , Forged,
Material:
CARBON STEEL FOR FLANGES : ASTM A105/A105N .A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2
A694 F42, F46, F48, F50, F52, F56, F60, F65, F70
Steel RST37.2, C22.8
Stainless steel:
304/SUS304/UNS S30400/1.4301
304L/UNS S30403/1.4306;
304H/UNS S30409/1.4948;
309S/UNS S30908/1.4833
309H/UNS S30909;
310S/UNS S31008/1.4845;
310H/UNS S31009;
316/UNS S31600/1.4401;
316Ti/UNS S31635/1.4571;
316H/UNS S31609/1.4436;
316L/UNS S31603/1.4404;
316LN/UNS S31653;
317/UNS S31700;
317L/UNS S31703/1.4438;
321/UNS S32100/1.4541;
321H/UNS S32109;
347/UNS S34700/1.4550;
347H/UNS S34709/1.4912;
348/UNS S34800;
Alloy steel:
ASTM A694 F42/F46/F48/F50/F52/F56/F60/F65/F70;
ASTM A182 F5a/F5/F9/F11/F12/F22/F91;
ASTM A350 LF1/LF2/LF3;
Duplex steel:
ASTM A182 F51/S31803/1.4462;
ASTM A182 F53/S2507/S32750/1.4401;
ASTM A182 F55/S32760/1.4501/Zeron 100;
2205/F60/S32205;
ASTM A182 F44/S31254/254SMO/1.4547;
17-4PH/S17400/1.4542/SUS630/AISI630;
F904L/NO8904/1.4539;
725LN/310MoLN/S31050/1.4466
253MA/S30815/1.4835;
Nickel alloy steel:
Alloy 200/Nickel 200/NO2200/2.4066/ASTM B366 WPN;
Alloy 201/Nickel 201/NO2201/2.4068/ASTM B366 WPNL;
Alloy 400/Monel 400/NO4400/NS111/2.4360/ASTM B366 WPNC;
Alloy K-500/Monel K-500/NO5500/2.475;
Alloy 600/Inconel 600/NO6600/NS333/2.4816;
Alloy 601/Inconel 601/NO6001/2.4851;
Alloy 625/Inconel 625/NO6625/NS336/2.4856;
Alloy 718/Inconel 718/NO7718/GH169/GH4169/2.4668;
Alloy 800/Incoloy 800/NO8800/1.4876;
Alloy 800H/Incoloy 800H/NO8810/1.4958;
Alloy 800HT/Incoloy 800HT/NO8811/1.4959;
Alloy 825/Incoloy 825/NO8825/2.4858/NS142;
Alloy 925/Incoloy 925/NO9925;
Hastelloy C/Alloy C/NO6003/2.4869/NS333;
Alloy C-276/Hastelloy C-276/N10276/2.4819;
Alloy C-4/Hastelloy C-4/NO6455/NS335/2.4610;
Alloy C-22/Hastelloy C-22/NO6022/2.4602;
Alloy C-2000/Hastelloy C-2000/NO6200/2.4675;
Alloy B/Hastelloy B/NS321/N10001;
Alloy B-2/Hastelloy B-2/N10665/NS322/2.4617;
Alloy B-3/Hastelloy B-3/N10675/2.4600;
Alloy X/Hastelloy X/NO6002/2.4665;
Alloy G-30/Hastelloy G-30/NO6030/2.4603;
Alloy X-750/Inconel X-750/NO7750/GH145/2.4669;
Alloy 20/Carpenter 20Cb3/NO8020/NS312/2.4660;
Alloy 31/NO8031/1.4562;
Alloy 901/NO9901/1.4898;
Incoloy 25-6Mo/NO8926/1.4529/Incoloy 926/Alloy 926;
Inconel 783/UNS R30783;
NAS 254NM/NO8367;
Monel 30C
Nimonic 80A/Nickel Alloy 80a/UNS N07080/NA20/2.4631/2.4952
Nimonic 263/NO7263
Nimonic 90/UNS NO7090;
Incoloy 907/GH907;
Nitronic 60/Alloy 218/UNS S21800
Industrial Flange,Industrial Pipe Flange,Industrial Pipe,Steel Pipe Flanges
HeBei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.guanghaofitting.com