Analysis of the model and performance of heavy melting scrap

The heavy-melting scrap heavy-melting scrap is a scrap named after the US scrap standard, namely HeavyMeltingScrap, which is divided into No. 1 remelted scrap and No. 2 remelted scrap.

Heavy melting scrap

among them:

No. 2001 heavy scrap for smelting. Forged steel or scrap, the size of the single block must not exceed 4 inches (the size of the loading box), and must be processed to ensure compaction loading.

No. 2011 heavy scrap for smelting, 3 feet 8 inches, scrap wrought iron or scrap, thickness ≥ 1/4 inch, single piece size not to exceed 36? 8 inches, (loading box size), need to be processed to ensure compaction loading operation.

Heavy scrap steel for smelting 2021, 5 feet 8 inches. Waste wrought iron or scrap, thickness ≥ 1/4 inch, single piece size should not exceed 60 ~ 8 inches (loading box size), need to be processed to ensure compaction loading operations.

No. 2032 heavy scrap steel for smelting, scrap wrought iron or scrap steel, uncoated and galvanized, thickness ≥ 1/8 inch, charging specifications include materials that are not suitable for heavy smelting of No. 1 smelting, which must be processed to ensure compaction Loading operation.

Heavy scrap steel for smelting No. 2042. Waste wrought iron or scrap, uncoated and galvanized, up to 36 feet 8 inches in size, can include all properly processed automotive scrap.

Heavy scrap steel for smelting 2052, 3 feet x 18 inches. Waste wrought iron and scrap, uncoated and galvanized, with a maximum size of 36 x 18 inches. It can include suitably processed automotive scrap, but does not contain thin iron sheets and light and thin materials.

Heavy-duty scrap 2020 smelting, 5 ft. x 18 in., wrought iron and scrap, uncoated and galvanized, with a maximum size of 60 x 18 inches. It can include suitably processed automotive scrap, but does not contain thin iron sheets and light and thin materials.

The United States and Japan are major exporters of internationally exported heavy-melt scrap, with the United States mainly exporting No. 1 heavy-melt scrap and No. 1 and No. 2 blended heavy-melt scrap, while Japan is mainly exporting No. 2 heavy-melt scrap; For China and Taiwan, South Korea, Turkey, Canada and other countries.

3D Panel Fence

3D Panel Fence

3D Wire Fence Introduction:

- 3D Wire Fence is also called the Curved Wire Mesh fence. This is a new type of fencing, which is mainly popular in developed countries such as the United States, Japan, Korea, and so on. The 3d fence has the characteristics of beautiful appearance, no limitation of terrain fluctuation and convenient installation.

- 3D Wire Fence is wide used for Garden, factory, road, highway, public buildings, parks, government buildings, ball court, industry & commercial sector and so on.

3D Panel Fence,3D Mesh Fence,3D Wire Fence,3D Wire Mesh Fence

HeBei Bosen Metal Products Co.,Ltd , https://www.hbbosenfence.com