Zeus pump FSB series fluorine plastic corrosion-resistant pump mechanical seal of the precautions

[Asia Pump Network News] FSB series of fluorine plastic corrosion-resistant pump Zeus pump according to the different conditions of use of different mechanical seal installed in the pump, the pump normally installed supporting the factory seal is WB2 or 169 type. Please note the following when using: Zeus pump FSB series of fluorine plastic corrosion-resistant pump mechanical seal of the Notes 1. General mechanical seal suitable for clean non-suspended hard particles of media, if the particles please pre-order at the same time inform . The new series of piping and storage tanks, should be carefully washed to prevent solid particles into the seal face, so that the seal failure. 2. In the crystallization of the medium, the use of mechanical seal, pay attention to regular washing, stop and restart before the seal end of the crystal to clean. 3. Disassembly mechanical seal should be careful not to use hand hammer, iron and other objects percussion, so as not to damage the dynamic and static sealing surface. 4. If the mechanical seal after long-term use of dirt can not be demolished down, do not force percussion, should try to remove dirt, rinse, and then disassemble to ensure that the components intact. 5. Before installing the mechanical seal, you should first check the mechanical seal components failure and damage, if any, should be replaced or repaired, and strictly check the dynamic and static sealing surface damage, shall not have any minor scratches, broken edges and defects , All parts (including the pump body, impeller, back cover, sealed chamber, etc. rinse clean before installation, and then coated with a layer of clean grease or oil 6. Assembly, pay attention to the parallelism of static ring and back cover to Anti-impact sealing effect 7. Correctly adjust the spring compression force, so that it should not be too tight too loose, first install the pump by hand rotation, the seal should feel some compression, but can be flexible and flexible rotation , If there is no feeling of adjusting the compression force of the spring to ensure the sealing effect. Expanded reading: Pumps Valves Pipe Fittings Exhibition Water Expo Xiamen Maritime Exhibition Internet + Forum Yiwu Expo Fair Mold Top Ten Brands Industrial Internet (Xiamen) Technology Limited Company Asia Pump Network Editor: He Daohui (QQ / WeChat:) http://beng.liuti.cn/ (Service Hotline:)

Sanitary Sampling Valves

A sampling valve is a type of valve used in process industries that allows taking a representative portion of a fluid (gases, liquids, fluidized, solids, or slurries)Sanitary sample valve is also called sample cock valve, sampling valve, including stainless steel sanitary sampling valves, food grade sample valves, hygienic sample valves,Kaysen supply supperial quality stainless steel sanitary sampling valves, food grade sample valves, hygienic sample valves in SS304, SS316, SS316L materials, size from 1/2"-4", DN15-DN100, connection types contains weld, clamp, thread types,etc
Sanitary Sampling Valves Specification:
Material: SS304, SS316 or SS316L
Connection Standard: 3A, DIN, SMS, ISO, IDF, RJT, BPE
Port size: DN15-DN100, 1/4"-4"
Connection type: weld, clamp, thread
Gasket material: EPDM, PTFE, VMQ. All are FDA approved.
Pressure: 0-6bar
Temperature range: -10℃ to 120℃(EPDM), -40℃-130℃(PTFE)

Sanitary Sampling Valves,Food Grade Sample Valves,Hygienic Sample Valves

Kaysen Steel Industry Co., Ltd. , https://www.chinasanitaryvalve.com