After you buy a toilet with the same wall space and seal the cushion, you can start installing it.
First, make the water outlet saw short, and make the water outlet as high as 2mm-5mm above the ground as far as conditions permit. Place the location of the toilet expansion bolt. Clean the site, and place the sealing cushion around the drain nozzle. Use cement pads).
Then put the toilet's water outlet on the floor and place it gently on the ground. After confirming it is in place, you can test the water. If everything is fine, you're done.
Toilet cement
Grease Distributor,Distributor Grease,Premalube Distributors,Lubrication Distributor
Yantai Ciso Lubrication Technology Co.,LTD , https://www.cisolubrication.com