In the home decoration, the installation of tile skirting is a very simple matter, so the decoration workers are very rough to do this kind of work, in order to hold the fast pace. Although the installation of tile skirting is a small thing in the decoration, if the installation is not good, no matter how good the floor, the wall effect will not be good. Therefore, we must be very familiar with the installation process of the tile baseboard and find out the problems in the process of construction. Only in this way can we present the best results.
First, what is the baseboard
The baseboard is a special word for decoration. In the design of the living room, the shades of the shades, waistlines, and skirtings play a visual balancing role. Using their linear feel, texture, and color to echo each other in the room, they can have a good beautifying effect. Another function of the baseboard is its protection function. Baseboards, as the name suggests, are kicked wall areas, so they are more vulnerable to impact. Skirting can better bond the wall and the ground, reduce the deformation of the wall, and avoid damage caused by external forces. In addition, the skirting board is also relatively easy to scrub. If the floor is splashed with dirty water, scrubbing is very convenient. In addition to its own function of protecting the walls, the baseboard also occupies a considerable proportion in the proportion of home furnishings. It is the outline of the ground, and the sight will often fall naturally on it. Generally, the thickness of the baseboard of the decoration is 5mm-12mm or 8mm-15mm.
Second, tile skirting installation process
1, drilling
Before drilling, you must first observe the location of the hydropower wiring to prevent mistakes. The interval between drill holes should not be too large, otherwise it will make it difficult for the baseboard to stick to the wall. The length of the baseboard is generally 2m. In order to make the skirting board more securely fixed to the wall, the spacing should be about 40cm when drilling, and the spacing at the interface should be smaller. Stick the small bar into the hole you just made. The nails fixing the baseboard are nailed to the wooden bar and are directly nailed to the wall. The nails are easy to loosen.
2, fixed
Before fixing the skirting board, clean the wall so that the skirting board will fit completely against the wall and no ugly gaps will exist. Look for the drill hole and fix the nail on the baseboard. When fixing the baseboard, it is necessary to pay attention to whether it is close to the wall, and the nail should be completely immersed in the baseboard. The surface should not be seen.
3, corner treatment
Corners are where the baseboard meets. The edge of the baseboard is generally cut at a 45-degree angle so that no unsightly traces are left at the interface. Then the fixed baseboard is fixed.
4. Installation points
The fixed baseboard nails use special screw nails, so the fixing effect is better and it is not easy to loosen. We must pay attention to whether manufacturers cut corners.
Editing summary: Although the skirting board is insignificant in the whole decoration process, if the tile baseboard is not handled well, it will affect the overall effect. The relevant introduction of the baseboard in the article is very practical, on the installation process of the tile baseboard. Know how much is introduced here. For more information, you can follow this site information.
Tile floor tile floor tile
Three Row Paint Brush,Brush Oil Photoshop,Brushes Medibang Paint,Fence Paint Brush
Laizhou Chenke trading Co., Ltd. , https://www.chenkegroup.com