In the normal use phase of the multi-pole type trolley wire, the following relevant components should be regularly checked:
1. Check the brush wear of the conductor in the conduit. Replace it if it has exceeded the normal wear length.
2, check the catheter (rail) joints, whether rust and loose. Whether the fixed value added, shift fork, etc. are loose.
3, check whether the catheter bending deformation.
4, remove the dust accumulated on the catheter, cleaning can not be used too much force to prevent damage to the plastic catheter.
5. In the case of brush grinding in the conductor, replace the brush immediately when the brush wears to a distance of less than 2 mm from its extreme projecting position.
6, check the wheel wear, the roller can ensure the correct position of the brush in the pipe up and down, excessive wear of the roller will also cause the brush to wear or continue to lose power.
Yangzhou City Angli Sliding Line Electric Co., Ltd. will be dedicated to customer service and make due diligence on the technology of feeding the slide rails on mobile vehicles.
dedicated to steel Hot/Cold rolling mill equipment developed high-tech enterprises, the company has a number of independent research and development of the franchise, ultra-high-quality cost-effective in the industry chasing far ahead
China Rolling Mill Equipment,Rolling Mill Machine,Automatic Roller Mill,Roller Mill Machine, we offered that you can trust. Welcome to do business with us.
Rolling Mill Equipment,Rolling Mill Machine,Automatic Roller Mill,Roller Mill Machine
Shanxi KathayTech Co.,ltd. , https://www.jdsmachine.com