The correct way to use the bathroom sink

1. Be extra careful when moving and installing the sink to avoid damage from the exposed edge.

2. The sink is made of high quality stainless steel plate and will not rust itself. However, improper use and maintenance will result in “rust rust” and “mold spots” on the surface of the sink.

A. When the kitchen is decorated, welding scraps, cement, oil stains, etc. remain on the surface of the sink. If it is not cleaned in time, it will cause rust and mildew.

B. In many areas of China, the water quality is poor. Most of the water pipes are galvanized pipes. The content of iron and other metal elements is high. After the water tank is used, if there are more water stains, the iron in the water will rust.

Especially in the renovation of new houses, such as long-term residual water in the water pipes, leaving water stains on the water tanks to be cleaned, it is easy to cause "rust rust".

C. Sometimes, the newly-decorated house with acid and alkaline dust falling on the surface of the sink will cause “floating rust”.

D. Steel utensils such as kitchen knives, scissors, and bottle openers are placed on the surface of the sink for a long time, causing “rust rust”.

E. Wipe the sink with a steel wire ball. The iron left on the sink will also cause “floating rust” and scratch the sink.

F, chemical agents, cleaning agents, paints, sauces, oil stains, etc. remain in the sink. Over time, it will cause mold to stick to the surface of the sink.

Prevention and treatment:

· Kitchen decoration, the last installation of the sink. Before installation, drain the long-term residual water in the water pipe. After installation, rinse the water tank thoroughly.

· Clean the sink after each use of the sink, leaving no dirt or accumulated stains.

• Do not leave the kitchen knife, bottle opener, etc. in the sink for a long time; do not use steel balls to scrub the sink.

· In case the sink appears “floating rust” and “mold spot”, apply toothpaste to the rust spots, spots, and scrub with a scrubbing cloth.

3, do not cut the items directly on the sink, because the sink will be scratched, and can not scrub the sink with a hard cleaning, as they will also damage the surface of the sink.

4. The high-quality stainless steel used in the water tank itself is not magnetic, but when the stainless steel material is stretched into a water tank, the metal crystal of the sheet material is pressed by high pressure, and a small amount of martensite structure is generated, and the structure is mild.

Magnetic, and where the deformation is large, the magnetism will be larger, and where there is no stretch, such as the panel, there will be no magnetism. These magnetisms do not affect the function of use, and over time, they will weaken or even disappear.

Some products are not magnetic because they are weakly degaussed.  

Sound Insulation Board

WUXI HOLLY rubber sound insulation board is an acoustic material developed with unique and advanced technology.Compared with traditional materials, the closed cell design ensures the same amount of sound insulation while reducing the density of the material and the weight is lighter.

Sound insulation sponge foam products are widely used in studio, recording room, residence, hotel, night club, schools, ballroom, hospital,
office building, industrial workshop, electrical and mechanical equipment, aerospace, metallurgy, machinery, medical equipment,
environmental protection, automotive, marine, cooling tower, automobile and motorcycle engine, architectural decoration, household appliance, etc.

Sound Insulation Board,Soundproofing Panels For Walls,Sound Reduction Board,Outdoor Soundproofing Material

Wuxi Holly International Trading Co., Ltd , https://www.hollynbr.com