Structure and Application of Non - clogging Submersible Sewage Pump

QW non-clogging submersible sewage pump is based on the digestion and absorption of non-clogging pump technology and submersible motor technology developed based on the new series of products, with high reliability, long life, non-clogging performance and good features. QW non-clogging submersible sewage pump adapted to conveying temperature less than 45 ℃, the density of less than 1050Kg / m with solid particles and long fibers of sewage sludge liquid, widely used in industrial and mining enterprises pumping sewage, mud discharge at the project site, the temporary pump Room water and farmland irrigation. QW non-clogging submersible sewage pump structure: single-stage single-suction vertical installation: pump and motor coaxial. Bearings with rolling bearings, thin oil lubrication, shaft seals in the form of two mechanical seal series, the product can be used fully automatic control system to prevent maintenance personnel directly into the pit of trouble, to achieve unattended operation of multiple automatic adjustment .

LED Module

The unique acicular radiator,360 degree dissipation small wind resistance. High heat dissipation efficiency ensuring that the LED chip can work for 50000 hours.

Color temperature 3000-6000K

Light≥90LM/W

Matching the 2.3.4 lane,tunnel and Landscape Lamp,floodlight dedicated lens.Ensure that intensity and uniformity.

Glare index Signification reduce the original LED module size,removal of power supply problems.Low demands for application situation and installation personnel More suitable for the transformation of traditional lamps.

Technical parameters

Power :30W,30W,15W,15W

Structure size: 135×100×40 mm, 208×74×49 mm, 125×58×30mm, 380×40×25mm

Lens size: 135×100 mm, 186×64 mm, 125×58mm, 355×40mm

Input voltage: 220 V, 220 V ,220 V, 220 V

Input current: 0.132 A, 0.132 A ,0.123 A, 0.125 A

Luminous flux: 2760 LM ,2400 LM ,1230 LM ,1300 LM

Light effect: 92 LM/W 80 LM/W 82 LM/W 86 LM/W

Color temperature: 5000 K 5000 K 5000 K 5000 K

Power factor: 0.99 PF 0.98 PF 0.98 PF 0.99 PF

Working temperature: -40+50°C, -40+50°C, -40+50°C ,-40+50°C

Led Module,Led Modules For Signs,Led Module Bulb,Led Modules For Signage

Jiangsu chengxu Electric Group Co., Ltd , https://www.chengxulightings.com