(1) The air inlet direction of the air inlet of the dust collector should have a certain inclination angle downward, generally within 12°. A large hole flow equalization plate should be installed before the inlet air duct, so that the dust can flow into each cloth bag within a certain range. It acts as a dust deposit and prevents the dust from flying twice.
(2) If the conditions permit, the cone should be raised to enlarge the cone volume. There should be a height of 200~600mm below the bag of the filter box of the dust collector, which is conducive to the uniform flow of each bag of dust and buffering the second flight.
(3) The main function of bag dust removal is filtration, but the dust should not be neglected, so that it has high efficiency.
(4) Pay attention to the choice of wind speed in the pipe network, which is an important issue in the control of medium dust.
(5) Due to the strong hygroscopicity of the dust, the anti-measure measures are to prevent the air duct, the dust collector equipment and the steam mixing tube from being insulated, so that the dust with higher temperature will not absorb moisture and stick.
(6) The ash discharge method cannot use a rotary valve and a spiral, but a double-layer air lock. The ash discharge pipe must be installed at an angle of more than 60° to prevent clogging of the ash.
Bag dust collector dust bag
(2) If the conditions permit, the cone should be raised to enlarge the cone volume. There should be a height of 200~600mm below the bag of the filter box of the dust collector, which is conducive to the uniform flow of each bag of dust and buffering the second flight.
(3) The main function of bag dust removal is filtration, but the dust should not be neglected, so that it has high efficiency.
(4) Pay attention to the choice of wind speed in the pipe network, which is an important issue in the control of medium dust.
(5) Due to the strong hygroscopicity of the dust, the anti-measure measures are to prevent the air duct, the dust collector equipment and the steam mixing tube from being insulated, so that the dust with higher temperature will not absorb moisture and stick.
(6) The ash discharge method cannot use a rotary valve and a spiral, but a double-layer air lock. The ash discharge pipe must be installed at an angle of more than 60° to prevent clogging of the ash.
Bag dust collector dust bag
Kitchen Sink Faucets,Touch Kitchen Faucet,Retractable Kitchen Faucet,Black Steel Hose Faucet
Yuyao Zelin Sanitary Ware Co., Ltd , https://www.zelinsinkfaucet.com