â— It should be used on a sturdy and flat floor to prevent the machine from shaking.
â— When using an explosion-proof dehumidifier, pay attention to whether the voltage of the power supply is compatible with the unit and do not use a socket together with other electrical appliances.
â— Do not use the machine next to a heat source to avoid increased power or accidents.
◠Do not use in an environment above 38°C.
â— When moving or moving the machine, do not tilt the machine more than 45 degrees.
â—When used under low temperature (below 18°C) environment, the dehumidifier will be frosted or icing. The fully automatic frost with defrosting function is generally not required unless necessary.
â— When using this unit, be careful to leave no less than 50cm-100cm of space around.
◠The dehumidification capacity of the machine is measured by the ambient 30°CRH80% as a standard.
â— Use a continuous drain to properly handle the assembly of drained external hoses.
â— Due to the difference in structure and air conditioning, the unit is slightly warmer when used in a narrow house.
â— When used in a well ventilated area, the dehumidification effect will not be noticeable.
◠When used under conditions of low humidity and low temperature (circle temperature <10°C and <45%), the amount of dehumidification will be significantly reduced or even not dehumidified, which is a normal phenomenon.
When the explosion-proof dehumidifier machine fails â—Turn off the power plug immediately â—Troubleshoot according to the troubleshooting method in the manual â—If the fault cannot be rectified according to the troubleshooting method in the manual, please contact the dealer or the manufacturer directly â—Transport damage should be directed to the local The dealer contacted the explosion-proof dehumidifier to remind the user â— The explosion-proof dehumidifier controlled by the microcomputer is used, and the temperature sensor is a precision instrument. The use of the instrument in the environment of strong corrosive gas and large dust may cause the malfunction of the instrument (the warranty period of the temperature sensor is six months).
â— When using a microcomputer to control the dehumidifier, read the manual carefully. Do not control the switch at any time in order to avoid damage to the computer control device.
â— The power supply of the power supply must have a 220V/50HZ AC power supply with grounding and relay protection (industrial dehumidifier series is 380V/50HZ). The power line must match the power of this unit. The rated current of the fuse is set according to the requirements of the user manual.
â— The machine should be allowed to recuperate regularly for a long period of operation, and the machine should be regularly maintained.
â— When using an explosion-proof dehumidifier, pay attention to whether the voltage of the power supply is compatible with the unit and do not use a socket together with other electrical appliances.
â— Do not use the machine next to a heat source to avoid increased power or accidents.
◠Do not use in an environment above 38°C.
â— When moving or moving the machine, do not tilt the machine more than 45 degrees.
â—When used under low temperature (below 18°C) environment, the dehumidifier will be frosted or icing. The fully automatic frost with defrosting function is generally not required unless necessary.
â— When using this unit, be careful to leave no less than 50cm-100cm of space around.
◠The dehumidification capacity of the machine is measured by the ambient 30°CRH80% as a standard.
â— Use a continuous drain to properly handle the assembly of drained external hoses.
â— Due to the difference in structure and air conditioning, the unit is slightly warmer when used in a narrow house.
â— When used in a well ventilated area, the dehumidification effect will not be noticeable.
◠When used under conditions of low humidity and low temperature (circle temperature <10°C and <45%), the amount of dehumidification will be significantly reduced or even not dehumidified, which is a normal phenomenon.
When the explosion-proof dehumidifier machine fails â—Turn off the power plug immediately â—Troubleshoot according to the troubleshooting method in the manual â—If the fault cannot be rectified according to the troubleshooting method in the manual, please contact the dealer or the manufacturer directly â—Transport damage should be directed to the local The dealer contacted the explosion-proof dehumidifier to remind the user â— The explosion-proof dehumidifier controlled by the microcomputer is used, and the temperature sensor is a precision instrument. The use of the instrument in the environment of strong corrosive gas and large dust may cause the malfunction of the instrument (the warranty period of the temperature sensor is six months).
â— When using a microcomputer to control the dehumidifier, read the manual carefully. Do not control the switch at any time in order to avoid damage to the computer control device.
â— The power supply of the power supply must have a 220V/50HZ AC power supply with grounding and relay protection (industrial dehumidifier series is 380V/50HZ). The power line must match the power of this unit. The rated current of the fuse is set according to the requirements of the user manual.
â— The machine should be allowed to recuperate regularly for a long period of operation, and the machine should be regularly maintained.
Draining Rack,dish draining rack,kitchen dish draining rack,dish drainer rack,Dish Rack sink,etc. The materials used are 304 stainless steel, easy to clean, never rust!
China Kichen Rack,Sink Grid,Stainless Mesh Storage Baskets,Kitchen Wire Storage, we offered that you can trust. Welcome to do business with us.
Kichen Rack is made of high quality 304 stainless steel, This kind of material steel luxury, never rust, resist corruption, easily clean, safe, healthy and durable. Prevent rust or chemicals from contaminating food and damaging health
Fruit Vegetable Washing Draining Basket,Stainless Steel Kitchen Tool,Draining Rack, Draining Basket
Shenzhen Lanejoy Technology Co.,LTD , https://www.injectionnut.com