Products Introduction of Plastic Hiflow Ring
Plastic Hiflow ring is a 3rd generation high performance tower packing which provides an optimal design of high mechanical stability, void fraction and superior mass transfer performance. The grid structure guarantees its opening pore ratio exceed 50% and bed void fraction is higher than same size's pall ring. In addition, large fluid flux guarantee its pressure drop per square meter lower 45% than pall ring. Vertical bar staggered distribution and reinforced horizonal stripe largely improve its rigidity and strength. It has features such as high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on.
Technical Specification of Plastic Hiflow Ring
Product name |
Plastic hiflow ring |
|||
Material |
PP, PE, PVC, CPVC, PVDF, etc |
|||
Life span |
>3 years |
|||
Size |
Surface area m2/m3 |
Void volume % |
Packing density Kg/m3 |
|
Inch |
mm |
|||
1/2" |
16 |
260 |
91 |
80 |
1" |
25 |
210 |
92 |
79 |
1-1/2" |
38 |
140 |
94 |
58 |
2" |
50 |
100 |
94 |
54 |
3-1/2" |
90 |
73 |
96 |
33 |
Feature |
High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. |
|||
Advantage |
1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. |
|||
Application |
These various plastic tower packing are widely used in petroleum and chemical, alkali chloride, gas and environmental protection industries with max. temperature of 150°. |
|||
Physical & Chemical Properties of Plastic Hiflow Ring
Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinyiidene fluoride (PVDF) and Polytetrafluoroethylene (PTFE). The temperature in media ranges from 60 Degree C to 280 Degree C.
Performace/Material |
PE |
PP |
RPP |
PVC |
CPVC |
PVDF |
Density(g/cm3)(after injection molding) |
0.98 |
0.96 |
1.2 |
1.7 |
1.8 |
1.8 |
Operation temp.(ºC) |
90 |
>100 |
>120 |
>60 |
>90 |
>150 |
Chemical corrosion resistance |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
Compression strength(Mpa) |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
Material
Our Factory assure all tower packing made from 100% Virgin Material.
Â
Shipment for Products
1. OCEAN SHIPPING for large volume.
2. AIR or EXPRESS TRANSPORT for sample request.
Packaging & Shipping
Package type |
Container load capacity |
||
20 GP |
40 GP |
40 HQ |
|
Ton bag |
20-24 m3 |
40 m3 |
48 m3 |
Plastic bag |
25 m3 |
54 m3 |
65 m3 |
Paper box |
20 m3 |
40 m3 |
40 m3 |
Delivery time |
Within 7 working days |
10 working days |
12 working days |
Â
Products Introduction of Plastic Hiflow Ring
Plastic Hiflow ring is a 3rd generation high performance tower packing which provides an optimal design of high mechanical stability, void fraction and superior mass transfer performance. The grid structure guarantees its opening pore ratio exceed 50% and bed void fraction is higher than same size's pall ring. In addition, large fluid flux guarantee its pressure drop per square meter lower 45% than pall ring. Vertical bar staggered distribution and reinforced horizonal stripe largely improve its rigidity and strength. It has features such as high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on.
Technical Specification of Plastic Hiflow Ring
Product name |
Plastic hiflow ring |
|||
Material |
PP, PE, PVC, CPVC, PVDF, etc |
|||
Life span |
>3 years |
|||
Size |
Surface area m2/m3 |
Void volume % |
Packing density Kg/m3 |
|
Inch |
mm |
|||
1/2" |
16 |
260 |
91 |
80 |
1" |
25 |
210 |
92 |
79 |
1-1/2" |
38 |
140 |
94 |
58 |
2" |
50 |
100 |
94 |
54 |
3-1/2" |
90 |
73 |
96 |
33 |
Feature |
High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. |
|||
Advantage |
1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. |
|||
Application |
These various plastic tower packing are widely used in petroleum and chemical, alkali chloride, gas and environmental protection industries with max. temperature of 150°. |
|||
Physical & Chemical Properties of Plastic Hiflow Ring
Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinyiidene fluoride (PVDF) and Polytetrafluoroethylene (PTFE). The temperature in media ranges from 60 Degree C to 280 Degree C.
Performace/Material |
PE |
PP |
RPP |
PVC |
CPVC |
PVDF |
Density(g/cm3)(after injection molding) |
0.98 |
0.96 |
1.2 |
1.7 |
1.8 |
1.8 |
Operation temp.(ºC) |
90 |
>100 |
>120 |
>60 |
>90 |
>150 |
Chemical corrosion resistance |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
Compression strength(Mpa) |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
Material
Our Factory assure all tower packing made from 100% Virgin Material.
Â
Shipment for Products
1. OCEAN SHIPPING for large volume.
2. AIR or EXPRESS TRANSPORT for sample request.
Packaging & Shipping
Package type |
Container load capacity |
||
20 GP |
40 GP |
40 HQ |
|
Ton bag |
20-24 m3 |
40 m3 |
48 m3 |
Plastic bag |
25 m3 |
54 m3 |
65 m3 |
Paper box |
20 m3 |
40 m3 |
40 m3 |
Delivery time |
Within 7 working days |
10 working days |
12 working days |
Â
Crystal chandelier is a kind of chandelier made of artificial crystal, with luxuriant, noble characteristics. The general shape of chandelier is unique and chandelier has high aesthetic value.
Crystal is a symbol of purity and nobility, and crystal chandelier is also a symbol of light and hope. Crystal chadelier is widely used in hotel, shopping mall, banquet, home, villa, etc and plays an important role in lighting field.
China Crystal Chandelier,Large crystal Chandelier,crystal Chandelier Manufacturer and Supplier,hotel crystal chandelier
Guangdong Lavius Lighting Co., Ltd. , https://www.lovuslight.com