Summary of the premise of a vertical valve:
I believe that everyone is still unclear about the use of JD745X multi-function water pump control valve. Today, a vertical valve is introduced for everyone.
JD745X multi-function water pump control valve is installed in the water supply, water supply, diving, sewage pumping station of municipal, construction, steel, metallurgy, petroleum, petrochemical, chemical, gas (natural gas), food, medicine, power station, nuclear power, water conservancy and irrigation. In the transportation system of petroleum and chemical fluids, it is automatically controlled by interlocking with the pump.
Its advantages:
One valve combines the functions of three types of electric valve, check valve and water hammer eliminator. It has low failure, tight shut-off, and reliable performance when the water pump can be stopped when the pump is stopped, the power is cut off, or the valve is closed. Such advantages can effectively improve the safety and reliability of water supply, and meet the requirements of mechanization and automation of water supply and drainage engineering equipment.
Technical performance description
Model: JD745X
Specifications: DN50 - DN1400, if you have a larger caliber, you need to contact our technical department, you can order!
The technical parameters are as follows:
1. Resistance loss: about 31% less than the swing check valve
2, diaphragm fatigue bending: 2 million times without damage
3. Applicable medium: raw water, clean water, sewage, oil, acid, lye, etc.
4, slow down time: 3 seconds ~ 120 seconds (adjustable)
5, medium temperature: 0 ~ 80 ° C
6, water hammer peak: ≤ 1.3 times the pump outlet rated pressure
7, the highest reversing speed of the pump: ≤ 1.2 times the rated speed of the pump
8, the work pressure: 1.0MPa, 1.6MPa, 2.5MPa, 4.0MPa, 6.4MPa, 10.0MPa
9, diaphragm fatigue bending: 2 million times without damage
More valve information in one vertical valve:
Http://news.chinawj.com.cn
Submission:
Precision Grinding And Polishing Machine
Ultra-precision cutting Ultra-precision cutting refers to the cutting method whose surface roughness is less than Ra0.04μm. The key problem in ultra-precision machining is that the thin surface layer of 0.1μm is cut in the final step. This requires both an extremely sharp tool with a radius of the blunt circle of the tool at the nanoscale and a tool with enough durability to keep it sharp. At present, only diamond tools can meet the requirements. In ultra-precision cutting, the cutting speed should be very high and the cutting amount should be small to ensure that the residual area on the workpiece surface is small, so as to obtain minimal surface roughness
Precision Grinding And Polishing Machine,Hi Tech Lap Grinder,Grinding And Buffing Machine,Diamond Grinding And Polishing Machine
TROJAN (Suzhou) Technology Co., Ltd. , https://www.troolymaterial.com