ECOTECHWOOD WPC is a green buidling material, it's made of 60% first grade natural wood fiber( Professionally Dry treatment ) ,30% of eco-friendly & first rectcled HDPE materials and 10% Chemical additivel ( antiUV agent, antioxidation agent, reinforcing agent, stabilizers, colorrants, anti-fungus agent, coupling agent ect..). 
 ECOTECHWOOD WPC FEATHURESÂ
1. 100% recyclable ,Eco-friendly ,saving forest resourcesÂ
2. With the look of the natural wood but no timber problems
3. Waterproof ,no rotten ,proven under salt water condition etc.
4.Barefoot friendly ,Anti-skidding ,no cracking ,no warpingÂ
5. No painting , no glue , low maintenance
6. Weather resistant , suitable from  -40°C to 70°CÂ
7.Insects restance and moldy -proofÂ
8.Available in different colores
9.Easy to Install and Clean Â
10 . Life time more than 15 years 
Popular Colors 
Production & Treatment & Packing & Shipping 
Product
Exhibition 
How to clean and maintentance the WPC decking ?Â
1. Scratch  Â
 Slight Scratch didn't matter a lot to the appearance of decking . A lisght metal brishing or medium sanding paper can be used if you insisted on removing such scratch .
2. General Dirt & DebrisÂ
  The affacted area should be sprayed off with a hose to remove surface debris . Use warm soapy water and a soft bristle brush to remove dirt and debris from the embossing pattern .
3. Ice & SnowÂ
 A plastic shovel may be used to remove snow from the deck .Use Calcium ,chloride or rock salt to melt the snow and ice from the deck surface .
4. Oil /Grease/FoodÂ
  All food spills should be removed as soon as possible . The surface must be cleaned within seven days to maintain the stain warranty . To remove , spray off with a hose and use warm,soapy water and soft bristle brush to remove spills from embossig pattern .
5.Mold & MildewÂ
  If debris such as pollen and dirt is allowed to remain on the deck surface ,mold can freed on the bio film .Using a hose and warm soapy water with a soft bristle brush is recommended to remove the food source and mold .
6. Water Stain
  Water stain may happen after heavy rains , this is because of wood content of WPC materials .Â
  When notice the stain ,wipe the stain by cloth with warm soap water in sunny weather will help remove the sta
Reed Switch Fuel Level Sensor, also called float fuel level senosr, it is done by sealed reed switches positioned inside the main shaft of the sensor. A float with built-in magnets then triggers the reed switch relays, generating a potential-signal with resistance, current, or voltage value that increases or decreases according to the fluid level, then give the signal to the gauge via wires, which shows the right level reading by pointer. In the whole reed switch level sensors,the float is the only moving part of the sensor,thereby minimizing potential mechanical failures to get the precision measurement.
Reed Switch Fuel Level Sensor,Fuel Float Sensor,Fuel Tank Float Sensor,Float Level Sensor, Float fuel level sensor
Xi'an Gavin Electronic Technology Co., Ltd , https://www.gamicos-meas.com