Nowadays, people live in commercial housing. There are certain differences between commercial housing and self-built buildings in the past. One of the most important differences is in the installation and design of the flue. In order to achieve rapid smoke emission and prevent odors, everyone should install the flue in the house. So what are the precautions for kitchen flue installation? Here everyone will follow Xiao Bian to get a detailed understanding of it.
Kitchen Flue Installation Precautions
It is estimated that many owners have encountered odors in the flue, which is actually caused by the lack of installation of the flue. Everyone should keep the vice flue when installing the flue. Each person's kitchen has a flue, and the flue is divided into the main and the auxiliary. The main flue duct runs through the entire building, while the vice flue is relatively independent. In general, the fumes in the home will go to the auxiliary flue and then enter the main flue through the holes in the partition. This will ensure that the fumes of each household are isolated. However, if the secondary flue duct is directly connected to the main flue duct, the phenomenon of smoking or crosstalk may occur due to the low pressure.
Kitchen Flue Installation Notes II
In order to make the cooking room look more beautiful, some owners will adopt a concealed installation, which causes the pipeline to be pulled too long. After the hood is closed, fumes in the pipeline cannot be discharged, and they are returned to the interior. Therefore, everyone should choose the position where the range hood is installed, and the shorter the pipeline, the better. In addition, in order not to destroy the original main and auxiliary flue, its opening direction is not arbitrarily changeable, and must be played inside the auxiliary flue.
Kitchen Flue Installation Notes III
In the actual renovation, some owners have abandoned the original flue and obtained alternative channels. They directly open holes and smoke on the windows or walls. This is okay, but Pay attention to safety issues. The end of the general exhaust pipe is made of metal. If the hole opened is too small, the metal heat transfer may cause the glass to burst and injure pedestrians, and the smoke pipe leads out of the window. Strong northerly wind blowing against the air can cause fume fall. It is better to stick the pipe out and put the pipe down into the nest. This will also prevent the rain from flowing into the pipe when it rains and keep the wind out.
Kitchen Flue Installation Notes Four
In order to prevent fumes coming back, many owners will use check valves when installing them. In general, there are non-return valves in the hood, but the effect is obvious. Install a non-return valve in the flue. This will not only protect the hood, but also prevent the smoke in the flue from flowing back into the duct and the hood. However, after installing the non-return valve, it should be cleaned regularly. Otherwise, the non-return valve will be opened and lose its effect. Moreover, the flue check valve should be replaced once every two years.
The above is Xiaobian on the kitchen flue installation precautions and how to quickly smoke to prevent odor related to share, for everyone to be a reference! If you have more related questions, welcome to continue to pay attention to Qijia Information. We will provide more exciting content for you later.
Features:
1) high brightness
2) Self-adhesive tape on each module
3) Energy efficient, major reduction in power costs
4) Low heat, high brightness, works well under harsh conditions
5) Long service life more than 50000 hrs, virtually no maintenance during lifetime
6) without lead, mercury, and other harmful substances; healthy, environmental friendly
Outdoor Led Module,IP65 Module Light,110V Led Module Light,RGB LED Module Light,Led Module With Lens
Shenzhen You&My Electronic Technology Co., Ltd , https://www.szyoumy.com