Introduction to the installation notices of intelligent products and detectors (Part 1)

Precautions for smart product installation

1. Notes on installing the host:
To install the host, you must first understand the Golden Eagle Intelligent Security System, and first understand the control center of the system-the host.
1. The function of the host is to receive the probe signal. Although it is small in size, it has full functions, which is equivalent to a microcomputer processor.
2. The two jacks on the right side of the host are used to connect the outside line of the phone and connect the phone with the host.
3. To set the phone on the host, just pick up the receiver of the phone connected to the host, press the record button of the host lightly, and dial "# 1 ＊ 电话 号 #" directly. The host sends a short and a long after dialing. "B" sound indicates that the setting is confirmed. The "1" set to "# 1 *" indicates the first alarm call, and the second alarm call is: "# 2 * phone number #", a total of 6 alarm calls can be entered in this order. (Note: Before setting a group of phones, you must press the record button lightly)
4. Introduce to the customer that the host can dial out several preset telephones with the help of the telecommunications network. You can ask the customer if they have a mobile phone or pager. If yes, it is better to enter the customer's own mobile phone for better results.

5. After entering the phone, to enter the recording, press the recording button on the main unit for about 3 seconds. When the main unit emits a "B" sound, start leaving a message about 20 cm away from the main unit, and clearly record the address and other information. After recording, release the recording button, the host will emit a short and long "B" sound, indicating that the recording is complete. For example: Mr. Wang's house in Room 302, Building 6, District E, Dihao Garden, Bagua Road, Shenzhen, there is an emergency, please come to the rescue quickly. If you need to check the recording effect, you can trigger the detector to let the host make a call, and then lift the telephone receiver connected to the host.

6. After the product demonstration, remember to delete the customer phone set on the host to avoid accidentally dialing the customer phone when the product is demonstrated again. Just remove the set phone and recording by unplugging.

Second, the precautions for operating the remote control:

The remote control is used to arm, disarm, and emergency help the host. Used in the family, it is equivalent to a key for each family member. The key marked with the lock image is the arming key and is used to open the host system; the key marked with the unlock image is used to close the system. Press the arming key by hand, the main unit starts to enter the alert state after making "B" sound.

1. When the host alarm deterred the gangster, you can press the emergency button on the remote control with your hand, the host will emit up to 110 decibels of alarm, let the customer listen to the effect of the alarm sound, and can smile and ask the customer Under the sound of the alarm, the possibility of burglary burglary has been reduced to very small. But if there are customers who feel that this kind of alarm sound is still not enough to scare off the gangsters, we also have a dedicated sound and light external siren to meet the customers' special requirements for the loudness and brightness of the siren.

2. The remote control is equivalent to the key of each family member, arming before leaving the house, and then returning to the door to disarm.

3. When operating the remote control, customers will ask more common questions:

For example: If the family members go home, will they call the police?

A: Every member of the family will have a remote control. You can disarm before entering the house, and then use the lock to open the door so that there will be no alarm.

Three, the matters needing attention in the installation of door sensor:

The door sensor is used to detect whether the door has been opened illegally. It can be used to prevent windows or drawers from being opened.

There are only two ways for the gangster to enter the house from the door: one is to steal the master's key and open the door; the other is to pry the door open with the help of a tool. No matter what method the gangster uses to enter, he must push open the door of the house. Once the thief pushes the door open, the door and the door frame will be displaced, and the door magnet and magnet will also be displaced at the same time. The signal is immediately transmitted to the host, the host sounds the alarm and dials 6 preset phone numbers. (At this time, you can ask the customer to take out the mobile phone or walk to the preset phone to answer) After the customer answers the phone, he looks at the customer and smiles and asks "Is the recording just made? How effective?" Guides the customer to affirm the product .

Common problems of door sensor:

1. If you start to use the product, in case you forget to disarm, is that very troublesome?

Answer: The remote control is hung with the key. When you take out the key to open the door, you can see the remote control immediately remember to disarm.

2. If relatives and friends visit, wouldn't that also call the police?

Answer: If a friend comes to visit, you can disarm and then open the door, or the master can be undefended when at home during the day.

4. Notes for installing outdoor invisible defense railings:

Introduced from the door magnet to the outdoor invisible defense railing, you can use a lead-in language

For example, with the continuous development of metal anti-theft doors in recent years, metal anti-theft doors have grown to a certain scale. Some cat eyes are self-locking and thickened steel plates. It has been accepted by Chinese people. In fact, no matter whether the customer installs the anti-theft door or not, there is no conflict with this product, it can play a better anti-theft role. The problem that really troubles the people today is how to solve the prevention of windows and balconies. The traditional metal fence affects the city appearance and hinders the fire rescue channel, and it can not really play the role of anti-theft. Our anti-windows can completely replace the metal The smart stealth defense railing of the guardrail is our company's flagship product. It is generally installed on both sides of windows and balconies. One end emits and the other receives, forming four invisible M-shaped mesh infrared beams.

1. Outdoor invisible defense railings should focus on introducing its several advantages:

A: The outdoor invisible defense rails are installed outdoors and are not afraid of sun exposure and wind and rain, which can completely prevent thieves from being outdoors.

B: If there are flying birds or pets blocking the infrared beam in the outdoor invisible defense railing, it will not cause a false alarm.

C: Outdoor invisible defense railings are not afraid of vandalism. Such as: the power cord is cut or damaged and removed. (When introducing this function, you can disconnect the black and white flower wire interface of the outdoor network by hand to let customers experience the effect.)

2. Introduce common problems of outdoor network:

1: If the outdoor invisible defense railing is installed outdoors, will it affect the effect if it gets wet?

Answer: The outdoor invisible defense railing is a fully enclosed device. The only holed plug has a waterproof function, so it is not afraid of rain.

2: Will outdoor invisible defense railings installed outdoors be affected by sunlight?

Answer: The outdoor invisible defense railing has passed the anti-interference light interference test when the Ministry of Public Security was tested, and no false alarms will be generated. However, it is generally recommended that customers do not direct the receiving end directly to the sun during self-service installation.

3: Will there be false alarms when small objects such as birds, pets, leaves, etc. block the infrared beam in the outdoor invisible defense railings?

Answer: There are four beams of outdoor invisible defense railings. Only two adjacent beams must be blocked at the same time to send a signal to the host. When installing, we generally install them 20 cm higher than the window or balcony. The volume is not enough to block the two adjacent infrared beams, so it will not cause false alarms.

4: The outdoor invisible defense railing is installed outside the window. If the gangster cut the power cord or do other damage to it, will it fail?

Answer: The outdoor invisible defense railing is cut as if the beam is blocked by an object. Once the signal from the transmitter is not received, the receiver will immediately send an alarm signal to the host. The transmitter and receiver are also equipped with anti-tamper switches. When the casing is opened, an alarm signal will also be output.

5: The outdoor invisible defense railing is only 60 cm long, always feel insecure?

Answer: The outdoor invisible defense railing is installed at a position 20 cm to 30 cm higher than the window or balcony. This height is impossible for a human body to drill or fly without a fulcrum. This is through a lot of field tests and according to the human body Designed by engineering principles and technology. And there are several specifications of outdoor invisible defense railings, which can meet the requirements of different consumers for different defense areas.

6: The outdoor invisible defense railing has anti-shear function, but will it lose its effect if there is a power failure?

Answer: The outdoor invisible defense railing can be equipped with uninterrupted emergency power supply. In case of power failure, the emergency power supply will automatically supply power without affecting the effect.

5. Notes for installing infrared wide-angle detector and infrared curtain detector |:

When introducing from the outdoor infrared stealth defense railing to the curtain detector, you can use an introduction.

Such as: outdoor invisible defense railings must be powered by power, so this customer feels inconvenient, plus some convex balconies. Because it is not easy to install the defense railings on a flat surface, our company has developed a special installation that does not require flexible installation. Power-powered anti-window products-infrared curtain detector. It differs from the defense railing in that the curtain detector does not actively emit infrared light, but passively detects the human body's infrared spectrum to generate an alarm signal. If a thief wants to enter the home through a window, he will be detected by the curtain detector installed on the window as soon as he heads into the window. The curtain wall of the curtain detector is 20 cm, which basically does not affect the owner ’s activities at home. The price is cheap, the installation is concealed, and it has been recognized by many consumers after its launch. The infrared wide-angle detector is used for three-dimensional protection, so it is mostly used in anti-convex balconies and unattended warehouses.

Demonstrate the considerations of the two detectors:

When demonstrating two kinds of detectors, the switches on the detectors should be turned on one by one, so as to be disturbed and cause false alarms.

6. Notes on the operation of emergency distress function |:

From the introduction of the function of the curtain detector to the emergency help function, an introduction can be used.

For example: through the demonstration just now, you have learned about the functions of our company's intelligent security system, but this product of our company is not only anti-theft, it can also prevent emergency emergencies, anti-robbery alarms, fire alarms and Anti-gas leakage alarm. At this point, face the customer with a smile: you must really want to understand the emergency help function of our products, and then I will introduce to you how our company's products prevent emergency help. Although emergency incidents rarely occur in life, the consequences are very serious once they occur. Especially when some elderly people are at home alone, such emergency emergencies may occur. As the elderly grow older, their physical functions It is declining gradually, and sudden illness may occur at any time. Once it occurs, it is urgent to call for help. However, in this case, it is too late to call and it is easy to forget the phone number. A simple one-click emergency call is particularly important. Each remote control has a button marked with an alarm bell, which is an emergency distress button. As long as it is lightly pressed, the host immediately calls the police to draw the attention of neighbors and property security, and dials one by one according to the settings on the host. For help from the outside world, if the elderly are inconvenient to wear a remote control or worry about not operating, you can also install an emergency help button on the bedside of the elderly, the function and principle are the same.

7. Notes on operating anti-robbery alarm function |:

How to prevent the robbery alarm is actually the same as the emergency distress in operation, just press the emergency distress button, but if you press the emergency distress button in the face of the robber, the strong alarm sound may cause the gangster to use violence, which requires the host There is a silent alarm function, which can be captured when the gangster does not know the alarm. How to set the host to silent alarm, just unplug the external siren installed on the host before the host leaves home.

8. Attentions for installing anti-fire alarm and anti-gas leakage alarm:

As there are more and more electrical appliances in modern homes and more wires, once there is a short circuit in the wires, there is a hidden danger of fire. Before the fire starts, dense smoke will first be produced. Our company's fire alarm product is the wireless negative ion smoke detector commonly used by fire departments. Once the outside smoke absorbed by the detector reaches a certain concentration, it will immediately send a wireless signal to the host, call the police and make a call to the outside world for help. This type of detector has been widely used in banks, hotels and other places, and can be tested with cigarettes when demonstrating products. The product used to prevent gas leakage is a gas leakage alarm. It is used to make timely alarm on the leakage of gas, natural gas and liquefied petroleum gas. When demonstrating a gas leak detector, be sure to wait until the yellow light on the detector is not flashing before demonstration. It is generally used for lighter testing. Both the fire prevention alarm and the gas leakage alarm are first-level alarms. Regardless of whether the host is armed or disarmed, once the detector receives the alarm, it will send a signal to the host to avoid leaking the alarm without defense. When testing smoke detectors and gas detectors, when the detector absorbs external smoke or gas to a certain concentration, it will send a wireless signal to the host. At this time, it is impossible to remove the remote control to disarm, because the smoke or gas remains in the detector, and the smoke or gas must be removed. Usually, the smoke or gas is blown away with the mouth and then disarmed.

Nine, about product quality, price and after-sales service:

Through the short-term demonstration just now, the customer has learned all the functions of this product, and five potential safety hazards that may appear in the family are solved by our products. Of course, as a consumer not only cares about the function of the product, but also cares about the price, quality and after-sales service of the product.

In terms of quality, our company's products have passed the inspection of the Ministry of Public Security's Safety and Police Electronic Product Quality Inspection Center and the ISO9002 international quality management system certification. Users can also obtain Chinese insurance companies if they use our product quality problems to cause accidents. Up to 300,000 yuan in safety and quality insurance. In terms of price positioning, our company advocates "high-tech, civilian-oriented", positioning product prices to be comparable to traditional metal anti-theft nets. It is generally calculated according to the customer's residential unit type. The price of one room and one hall will not exceed 500 yuan, the two-bedroom and one hall are generally within 800 yuan, and the three-bedroom and two hall or more units are between 1,000 and 1,500 yuan. Affordable high-tech products.

In terms of after-sales service, our company worries the consumers.