Imported bearings are required to be "hot and cold devices"

Home>Bearing knowledge>Imported bearings need to be "hot and cold device"
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Imported bearings are required to be "hot and cold devices"

Source: China Bearing Network Time: 2013-03-10
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Bearing as the basis of modern industry. Fortunately, the night is more than the male 枨笸 (3) 熬翱春茫skf bearing; nsk bearing; ntn bearing, fag bearing; timken bearing). In the application process, the primary face will be the bearing device and commissioning; in the case of premature failure of all bearings; about 16% is caused by improper installation or incorrect device method.
Various applications can require mechanical, heating or hydraulic means to properly and efficiently mount the bearing. Choosing the right way to use the device will help you extend the life of the bearing's life; and reduce premature bearing failure and use The cost of creating a potential hazard. Therefore, improper installation will cause an incalculable loss to the customer. Here; the bearing trading network helps you to analyze the commonly used device methods for imported bearings. 1 bearing cold device medium and small bearings generally use cold device. Traditionally; the bearing is equipped with a hammer and a piece of old pipe. This method can cause external force to pass through the rolling part; then damage the raceway. SKF device puts external force on the selection Pressing the cooperation of the bearing ring; help to avoid bearing damage.
2 bearing heat device before; generally use oil bath to heat the bearing. However; this method can pollute the bearing; cause premature failure of the bearing. Today; induction heating is the most common method of heating bearings; this is due to its controllability, power And safety is very high. SKF Group has established an inductive heater development specification for bearing use. SKF bearing induction heater has many functions; it helps to prevent damage to the bearing during heating.
In addition, SKF provides a common online C service; free supply of equipment and disassembly of SKF bearings and housings in eight languages. This information service provides a step-by-step explanation for the installation or disassembly. The system also supplies Information about choosing the right things and lubricants. With this free web service; whenever and wherever you want; SKF's expertise is at your fingertips.
Final clarification; rotation test should be carried out after the bearing device; firstly used for rotating shaft or bearing housing; if there is no abnormality; no power and low speed work will be carried out with power; then the rotation speed and load will be gradually increased according to working conditions; and noise and oscillation will be detected. And temperature rise; found abnormal; should stop work and view. Work experiments can be delivered after normal use.
Recommend to friends comments close window

Bearing related knowledge
Imported bearing injection molding frame introduction sliding bearing technical standards (1)
Bearing device and disassembly method Analysis of the application of high-speed angular touch ball bearing


This article links to http://
Please indicate the bearing network http://

Previous:Characteristics and use of spindle bearing oil Next: Commonly used various types of bearing steel

Magnetic Track Downlights

The Spotlight in the LED Magnetic Track Light System are mainly used for Accent Lighting. The Spot Light can rotate 360° left and right and 90° up and down. It can illuminate objects at any angle. CRI is 90. This led lighting has strong color reproduction ability, which can make the illuminated objects more attractive. Very suitable for Retail Lighting.

0595862f4b9f309de860a435f02b403

Led Spotlight Indoor,Led Spotlight Dimmable,Led Spotlight Track,Track Light Spotlight

SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.szlitehomelight.com