Hydraulic pump failure analysis

Hydraulic pump repair from the following three points to find the cause of the malfunction, and the system to improve: Hydraulic pump failure reasons 1, check the boom cylinder leakage situation. The easiest way is to raise the boom to see if there is a clear free fall. If the whereabouts of obvious removal of fuel tank inspection, seals have been worn should be replaced. Hydraulic pump failure reasons 2, check the control valve. First clean the safety valve, check whether the spool wear, such as wear and tear should be replaced. If there is still no change after installation of safety valve, and then check the control valve spool wear, the gap limit of use is generally 0.06mm, severe wear and tear should be replaced. Hydraulic pump failure reasons 3, measuring the pressure of the hydraulic pump. If the pressure is low, then make adjustments, the pressure is still not adjustable, the serious damage to the hydraulic pump. In general, the main reason that the boom can not be lifted is as follows: 1. The hydraulic pump is seriously worn. The pump leaks seriously at low speed. When the pump runs at high speed, the pump pressure slightly increases, but due to the pump wear and leakage, the volumetric efficiency drops significantly and it is difficult to reach the rated pressure. Hydraulic pump work for a long time has exacerbated the wear and tear, oil temperature, resulting in wear and tear of hydraulic components and seals aging, damage, loss of sealing ability, hydraulic oil deterioration, and finally lead to failure. 2, hydraulic components selection is not reasonable. Boom cylinder specifications for 70/40 non-standard series, the seals are also non-standard parts, high manufacturing costs and seal replacement inconvenience. Boom cylinder bore is small, the system is bound to set high pressure.

Solenoid Dosing Pump

Solenoid dosing pump, a very special dosing pump which are widely used in the water treatment for the chemical dosing. It offers an extensive range of features, including microprocessor control for accurate and flexible automation in response to instrument signals. The microprocessor design employs a customized liquid crystal display (LCD) and a tactile response keypad. The "state-of-the-art" surface mount electronics are fully encapsulated to ensure protection in its working environment. All external inputs and outputs are opto-isolated from the microprocessor. With more than 10 years of production evolution, All AILIPU pumps are tested and rated under hot conditions guaranteeing that the flow and pressure ratings meet the specifications. there are no standards when pump encounter with certain type of chemicals, so it offers a variety type of material for choosen. In each unit package, including 2 and 3 meter outlet pipe, injection valve and bottom valve, besides with instruction, packing list and certification.Our Solenoid dosing pump is the best solenoid pump.

If you want to buy Mechanical Diaphragm Metering Pump, Solenoid Diaphragm Metering Pump, Piston Dosing Pump,Water Treatment Dosing Pump, Plastic Chemical Diaphragm Metering Pump, please contact us.

Solenoid Dosing Pump,Pvc Head Solenoid Dosing Pump,Pvdf Head Solenoid Dosing Pump,Automatic Control Solenoid Dosing Pump,Piston Dosing Pump,Best Solenoid Pump

Zhejiang Ailipu Technology Co., Ltd. , https://www.alipu.com