How to install a fire smoke detector

From a safety perspective, family fire prevention measures are essential. The kitchen is the place where home fires are most likely to occur. The ceiling of my home is also fir, so it is especially important to do fire prevention measures. In front of the hard-packing stage, I mentioned that the keel of the ceiling of the kitchen was coated with fireproof paint. See the hard-pack catalogue (continued) 39. Due to the fear of deformation, the ceiling of Fir plate was not coated with fire retardant paint.

I don't think about it, so I recently added alarm equipment to the ceiling. There are three types of home fire alarms, one is a smoke alarm, one is a gas alarm, and the other is a comprehensive type that combines both smoke and gas alarm functions. These two types of alarms are divided into alarm modes, which can be classified as stand-alone, networked, or wireless. Stand-alone type is a single alarm device working independently, with abnormal conditions will directly flash the indicator and emit high-decibel alarm; network-type can be connected through the wired connection to the supporting security host, through the host to send an alarm; wireless is through The wireless signal is sent to the matching wireless security host and the host sends an alert.

Independent smoke detector <br> <br> Product description:

â—† Photoelectric detection mode â—† Ceiling installation â—† Optical labyrinth â—† Low-power CMOS microprocessor â—† Manual test, manual reset function â—† Stable working performance â—† Unique structural design, dust-proof, insect-proof, anti-interference, external working voltage 9VDC/ 12VDC

Working current static electricity is less than 10ua alarm working current 10-30ma

Smoke sensitivity meets ul217 standard test value 3.2% per foot Weak gray smoke detectors have reactive work environment -10°C~50°C

Built-in buzzer, the alarm sound is particularly harsh, the side of the test button press can hear the alarm sound, the use of high-life detection chip, use up to 10 years, smoke reaches a certain concentration will immediately alarm.

The alarm volume is 85 decibels at 10 feet round size R=105mm, H=38mm

start installation:

Connect the positive and negative batteries to the detector's battery connector and push the battery into the battery compartment.

Secure the card holder to the ceiling with the pre-selected mounting position.

Secure the card holder to the ceiling with the pre-selected mounting position.

The two mounting holes at the bottom of the detector are aligned with the two chucks of the card holder and can be jammed with a slight rotation.

Test to press the test button or light a cigarette, close to the detector and let the smoke swirl around the detector.

About 30 seconds or so, the detector sensed the smoke and started the alarm: the red light flashed and made a harsh hum. It will not stop until the smoke disperses.

600W LED Grow Light

Ultra Plantâ„¢ Grow Light offers One Chip Technology aimed to meet your indoor growing expectation such as improve plants' quality, increase yield, or better the margin, etc., all for helping you realize a higher return on your crops.


Ultra Plantâ„¢ Grow Light is combined our advanced All-In-One technology with patented optical design and customized light full spectrum supported from our experienced LED engineers, plant specialists and other partners working on horticulture.


From Ultra Plantâ„¢ APP, you are able to schedule the growing process including photoperiod, brightness and spectral in advance. The lighting system will help you grow smarter, easier and better.


Ultra Plantâ„¢ is the most versatile horticultural grow lighting fixture for indoor plants with flexible full spectrum, brightness control and uniform, wider light distribution, suitable for top lighting of all types of crops. No matter it applies to anywhere for any crop, Ultra Plantâ„¢ can do perfect work for you.

600W Led Grow Light,Led Plant Lights,Led Grow Light,600W Led Grow Light For Sale

Feton Corporation , https://www.fetongrowlight.com