How to choose the model of Taiwan DSC trap?

Traps should first be selected to meet the optimal operation of the steam heating equipment, and then consider other objective conditions, so that the choice of the trap you need is correct and effective. 1. In the production process of heat exchange equipment, drying room, rapid heat exchanger, distillation equipment, etc. need to rapidly heat up, do not allow the production of heating equipment with condensed water, should use mechanical traps. Mechanical traps are not affected by changes in operating temperature and pressure. Water is discharged, and the degree of subcooling is small. There is no water in the heating equipment, which can make the heating equipment reach the optimal working temperature. Among them, the free float type steam trap has the most advanced structure and is very sensitive. The minimum degree of subcooling is 0 ° C. It can discharge condensed water at a saturated temperature without steam leakage. It has the most advantages and can achieve the best working efficiency of the heating equipment. It is the ideal steam trap for production process heating equipment. 2. In steam pipelines, heat tracing pipelines, small heating equipment, heating equipment, and steam equipment with low temperature requirements, thermostatic traps should be used. The thermostatic trap has a large degree of subcooling and a low condensing water temperature, which can fully utilize the sensible heat of the high temperature condensed water, and the energy saving effect is good. Among them, the membrane type steam trap has the most advanced structure, no need for manual adjustment, and is very sensitive. The maximum subcooling has two kinds of bellows of 15 ° C and 30 ° C for selection, not afraid of freezing, small volume, and can be installed at any position. It can repair and replace the valve core on the pipeline, save money and labor, long service life and wide application range. It is a boutique of thermostatic steam traps. 3. On high temperature and high pressure superheated steam lines and equipment, superheated steam traps should be used. The superheated steam trap can separate the high temperature condensed water generated when the superheated steam disappears under the severe conditions of high temperature, high pressure and small load. The disc type steam heat preservation type steam trap uses the pipeline steam to heat the main steam chamber of the steam trap, and has an advanced structure. In the case of no condensed water, the steam trap is tightly closed, the working quality is high, the service life is long, and the high pressure is overheated. Steam trap. Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

Music Box Springs

Music Box Springs,Brush Springs,Metal Springs,Flat Wire For Springs

Ningbo Yunsheng Elastic Components Co.,Ltd , https://www.yunshengsprings.com