When the State Grid proposed to build a smart grid as soon as possible, many related industries have already taken action, and the hardware and electrical industry has seized a new round of high-tech points in the smart grid in this round of engagement. Japan's nuclear power accident triggered global nuclear power reform to promote smart grid development to accelerate the start of the Japanese nuclear incident, which led to the "nuclear crisis" caused by many reasons: technical experts are too confident, insufficient risk estimation, lack of emergency plans, technical updates are not timely, etc. It’s a bit of a pain to be taken to discuss it at the moment. In short, the lesson is more or less affected by the global nuclear power and the economy. After the incident, countries have re-adjusted or strategically planned the nuclear power industry. Recently, Switzerland announced that it decided to gradually abandon nuclear power generation. The five nuclear power plants in the country will stop running after 50 years of maximum service life, which means that the country's last nuclear power plant will be shut down before 2034. The German side also reported that it will shut down all nuclear power plants by 2022. According to this plan, Germany will completely abandon nuclear power generation by 2022. Behind the nuclear abandonment plan, the German government’s determination to clean renewable energy and the grandeur of its plans are demonstrated. It is understood that while the announcement of the closure of the nuclear power plant in 2022, the German ruling coalition also announced another ambitious new energy plan, including vigorous development of wind, solar and bio-energy and the transformation of new smart grid, hope that by 2022 The proportion of renewable energy has doubled to around 35%. By 2012, the German energy industry will invest 30 billion euros to build power stations and expand the transmission grid. The smart grid will once again be pushed to a higher level. Looking at the world, there is no wolf who does not eat sheep. Let’s take a look at the previous plan of the smart grid in the country. According to the goal of “building a strong smart grid in 2015†proposed by the State Grid Corporation earlier this year, the smart grid is no longer away from us. distant. On the basis of years of power grid development and smart grid innovation practices in the past two years, during the “Twelfth Five-Year Plan†period, China's smart grid will enter a rapid development track, and the prospects are worth looking forward to. It can be said that the "Twelfth Five-Year Plan" period will surely be the key five years to accelerate the construction of smart grids. Faced with such a good prospect, the industry chain-related enterprises are naturally unpredictable, ready to go, waiting for "the shot when the shot", in order to seize the opportunity. The various layouts of the relevant industry chains have not been mentioned for the time being. With regard to the series of market effects triggered by Japan’s “nuclear crisis†recently, the smart grid will no doubt be pushed to a higher level. According to the observation of China Industrial Control Network, the recent actions of the industrial electrical and automation industry are frequently, they are quietly accelerating the layout of the smart grid market, expanding their position in the field through acquisitions and other ways, occupying more market share. In May, General Electric Company (GE) and the State Grid Corporation of China and the Chinese Academy of Sciences signed the Memorandum of Cooperation on Smart Grid Technology Standard Work. The three parties will complement each other to promote the standardization of smart grids in China. Semiconductors and nuclear power have always been Toshiba's two pillars. However, due to the Tokyo Power Fukushima Daiichi nuclear power plant accident, Toshiba President Sasaki Sasaki said at the time: "The nuclear power plant construction is estimated to have a certain delay due to the revision of safety standards." . It also said that the prospects of the nuclear power business are uncertain in the world. If the business cannot be continued, Toshiba will consider the nuclear power business in the future depending on the external environment changes, and does not rule out the possibility of changing its business positioning. Sure enough, on May 19, it announced its agreement to acquire Swiss electronic instrument manufacturer Landis+Gyr for US$2.3 billion, aiming at the next-generation power grid with promising prospects. According to Toshiba, the size of the global smart grid market may surge fivefold in the next 10 years, reaching 58 trillion yen (about 71 billion US dollars). On the same day, Guodian Nanzi (Jiangning) Smart Grid Industrial Park laid a foundation in the national-level Jiangning Economic Development Zone, and is committed to the development of intelligent power grid systems, intelligent distribution network systems, intelligent substation systems, intelligent primary equipment and other smart grid equipment and information security, Emerging industries such as the Internet of Things, reactive power compensation, and new energy access systems serve the country's smart grid construction and the implementation of emerging industry plans. It marks that Guodian South has entered a new round of rapid development, which also marks the further gathering of China's smart grid industry, which has far-reaching significance.
* ➤ Durable - Anti-static and washable, plus an additive in the resin to resist loading, features good abrasion resistance,anti-clogging.
2).Extra heavy X-weight cloth backing for high tear resistance
3).Resin on resin bond minimizes loading
main feature:
1).Heavy X-weight cotton/polyester fabric blend in a closed coat
2).Zirconia material has a self sharpening effect Perfect for very heavy duty applications
1) Specially for use on portable belt machines
2) Made of rugged aluminum oxide cloth to provide aggressive cutting action and resistance to sanding steel.
3) For metal working applications with moderate to heavy pressure
4) Feature fast cutting action and long belt life
5) Buffing And Polishing
6) Grinding line conditioning
7) Butt joint,lap joint and waves joint are available
Works with an assortment of belt sanding machines and applications.Providing a heavy duty stripping and sanding tool for wood, aluminum, fiberglass, rubber, plastic and non-ferrous metals
* ➤ Durable - Anti-static and washable, plus an additive in the resin to resist loading, features good abrasion resistance,anti-clogging.
* ➤ Applications - Work with belt sander – providing a heavy duty stripping and sanding tool for wood, aluminum, fiberglass, rubber, plastic and non-ferrous metals.
2).Extra heavy X-weight cloth backing for high tear resistance
3).Resin on resin bond minimizes loading
main feature:
1).Heavy X-weight cotton/polyester fabric blend in a closed coat
2).Zirconia material has a self sharpening effect Perfect for very heavy duty applications
3).Primarily used for hardwoods in new flooring/old floor refinishing applications
We distributes and wholesales various brands of Abrasive Sanding Disc , Cutting Wheels , Abrasive Flap Disc , Flap Wheels , Flap Disc Backing Pad, Flap Disc Adhesive , Abrasive Machine and Surface Conditioning Product etc, and enjoy a high position among consumers.
1) Specially for use on portable belt machines
2) Made of rugged aluminum oxide cloth to provide aggressive cutting action and resistance to sanding steel.
3) For metal working applications with moderate to heavy pressure
4) Feature fast cutting action and long belt life
5) Buffing And Polishing
6) Grinding line conditioning
7) Butt joint,lap joint and waves joint are available
8) Aluminum oxide resin bond belt is open-coated for wood working or use on soft metal
stainless steel sanding belt,sanding belt for steel,sanding belt for wood,Abrasive Sanding Belt,Electric Belt Sander
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jiadingabrasive.com