Frameless window installation process

Measuring level, safety bracket

Before installation, first measure the level and measure the level with a professional spirit level. The level generally cannot exceed 2mm.

After the level is measured, the stainless steel brackets are welded to the steel frame of the balcony, and the distance between the clamps is 500 mm.

The next step is to install the stainless steel bracket, and it must be firmly installed, otherwise it will directly affect the quality.

After the brackets are installed, there will be welded seams at the joints between the two brackets. The surface is treated with a grinding and polishing machine. The treated surface is very beautiful.

See profiles, guides

Let's take a look at the thickness of the rail profile. A good profile is generally 3mm, because the guide rail needs to have a relatively large amount of force to eat the glass, so the material thickness is much safer.

In the connection between the guide rail and the guide rail, a few ribs should be added, and the stainless steel laps the connecting port and riveted with rivets. This will make the guide rail connection more secure and will not loosen when used for a long time.

First install the lower rail and put the rail on the bracket. According to the hole on the rail, point the connection hole distance on the bracket. The hole pitch is also about 500mm, which is the same as the spacing between the cards.

Cut the hole with a gas cutting gun on the bracket. You can also use a percussion drill. The cut hole is best to be round, so that fixing the screw on the top is easier.

The next step is to install the upper rails. The upper rails and profiles are directly fixed on the balcony. Therefore, the holes should be perforated on the balcony ceiling. The installation method is basically the same as the lower rails.

After the upper and lower guide rails are installed, the level of the upper and lower guide rails is adjusted. If there is unevenness, it must be leveled. Otherwise, it will directly affect the use of the windows.

Test window, fittings

After the window is set into the sash to open the guide hole, debugging will be started. The entire window can be smoothly adjusted to slide and open in the guide rail.

The next step is to install the accessories. The first method is to install the approach bridge. The approach bridge is to ensure the smooth opening of each window, and it has the function of the safety lock. The device is installed next to the upper opening.

The upper and lower safety locks are mainly used to prevent children from opening the window without authorization and fixing the sash. The size of the opening of the sash can be fixed by the buckle of the approach bridge, which facilitates ventilation and avoidance.

This accessory is mainly used for the function of the fixed window after all the window sashes are closed to one place. By adjusting the sliding bar, one to several windows can be fixed at will.

The final installation of transparent moldings is mainly to seal the gap between the glass and the glass, prevent wind and rain from entering the room, and further strengthen the closure of the balcony.

>>> Related Links: Seeing Features Frameless Windows Rest assured to install

Door to buy balcony window glass stainless steel room steel frame

LED Inground Light

Key Feature of led underground lamps


Housing: Die-casting aluminum housing; stainless steel faceplate, corrosion-resistance coating; remarkable ventilation and heat radiation.

304 or 316 stainless steel material panel, superior quality, impact resistance and corrosion resistance.

Housing color: Gray
Embedded parts: Aluminum alloy
LED Chips: cree epistar cob .
Protection grade: IP67
Input Voltage: DC24V/AC100-264V, 50/60Hz
Rated Power: 1-50W
Color Temperature: R,Y,G,B,W,WW, a variety of colors for you to choose.
CRI:>80(white)
Efficiency: 80lm/W (white)
Control: on/off /DMX512/Controller
Beam Angle: 8°/12.5°/20°/30°/ 45°/60°/15*30°/10*60°
Operating Temperature: -25℃-50℃
Life span: 50000h
Warranty: 2 years for whole light



Model
DC 12 24V A
C 85-265V
LED Brand
CREE
EPISTAR
LED Quantity
1-36PCS
OEM ODM
Rated Power
1W 3W 5W 7W 9W 12W 15W
14W
Input Voltage
DC24V/AC100-240V,50/60Hz
Color Temperature
RGB/Single
RGB/single
Beam Angle
5°/8°/12.5°/20°/30°/ 45°/60°/15*30°/10*60°
Contrl Mode
DMX512/CC
DMX512/CC
Protection Grade
IP67
IP67

This underground floor lamp has a very wide range of applications, and you can install it in swimming pools, ponds, pools, fountains and other places. It can also be installed in gardens, squares, bridges, streets and other outdoor areas to achieve decorative effects.IP65 Waterproof floor recessed lights deck inground spotlight outdoor landscape ground buried lamp led underground light




Led Inground Light,Waterproof Underground Light,Outdoor Led Inground Lighting,Led Waterproof Underground Light

Shenzhen You&My Electronic Technology Co., Ltd , https://www1.youmyledlight.com