Electronic weighing scale error processing method

Weighing errors in electronic scales This is one of the more common problems we have. Many electronic scales have been used for a long time and this problem has arisen. What should we do if we encounter this problem? Today Xiao Bian came to share with you. The following is the relevant information collected by Xiao Bian. I hope to help everyone.
 

Electronic weighing scales have error processing methods:

1, first outside, after the internal: Do not move the electronic scale to open the case, without preliminary judgments and exclusion like to spread the stall is by no means a veteran approach. Looking to open the case to see where there is a broken line or obvious failure, it is purely luck, and even good luck can not be like this every time. About 50% of the faults are caused by the external environment or operations, cleaning, etc. If the shutdown time is long? Is there a large temperature difference between day and night? Is the position of the weighbridge instrument placed close to the elevator car? Is there any instrument in use near the instrument? Is the computer setting correct?

2. Look at the value: If the value is within -50KG, then the sensor's core is an elastic body. If the elastic body is not reset, it will show a relatively small negative number, such as -10 -20KG. These are normal. The zero key of the instrument can be set.

3. Negative numbers: For example, a weight is on an electronic platform scale. Then someone presses the zero key. When the weight is off the scale, it produces a negative number equal to the weight of the weight.

4, personally repeat the failure (if it can be repeated): do not rely on the user or the third party's dictation or statement. Careful observation does not rely on the user's dictation, especially the third party's statement. Some electronic scale operators, in order to shirk their responsibility, would say how the instrument itself suddenly happened, how it did not move, etc. These are understandable. The engineer will handle it properly.

5, first power, after the host; first accessories, after the host.

The above is just like everyone will be on the electronic weighing scale error processing method, if you do not understand this issue can call our telephone contact us, thank you for your great support!