Economic and practical is the biggest advantage of domestic tools

High quality and low price are the theme of this year's domestic tools. Close to production, economical and practical are the biggest advantages of domestic tools. Domestic tools through the exhibition and technical exchanges, to the user to pass their own advantages of the concept of high-quality and inexpensive cutting tools to improve production efficiency and reduce the total manufacturing costs. At the CNC machine tool trade show, cutting tool manufacturers from all over the country exhibited a variety of new types of cutting tools. They mainly used CNC turning tools, milling cutters, and coated blades with superior performance, highlighting the high efficiency, high precision, and high performance of domestic tools. specialty. A lot of old users visited the exhibition hall of domestic tools and watched the various tools on the booth in close quarters to jointly discuss the puzzles encountered in the use of the tools and solutions. The on-site tool engineers made detailed introductions to the tools of concern to everyone and seriously answered the questions raised by the users. High quality and low price are the theme of this year's exhibitors. Thanks to its extensive experience in the field of mechanical manufacturing, domestically produced cutting tools can provide users with a complete range of cutting solutions including tool selection, numerical control programming, and analog machining. Visitors can choose the best cutting tools and supporting services according to their actual needs and product characteristics.

The backward machining technology is one of the main reasons for the inefficiency of the metal processing industry. Good horses are equipped with good saddles. High-efficiency CNC equipment uses low-performance cutting tools, which can not bring into full play the advantages of the equipment but cause a greater waste of resources. In the past, when we talked about CNC tooling, the first thing that came to mind was an expensive foreign brand, and it was difficult for some companies with low value-added products to accept it. Affected by this, CNC cutters are mainly used in the finishing stage of CNC machine tools. Most ordinary machine tools still use inexpensive welding tools. After normal wear, they are reground many times. It is harder to sharpen a knife, and it is more difficult to grind a knife. Operators need to have a high degree of understanding in order to appreciate the mysteries, in addition to being skilled in sharpening methods and operating methods. After ten years of hard work, thousands of turning knives cast a senior lathe. The master craftsman has accumulated a lot of experience and skill in sharpening the knife. An ordinary welding lathe tool can be used for more than 10 hours in a row once it is worn. It is also more durable than the CNC blade. However, such skilled workers are rare after all. In addition, in modern production-line-oriented production mode, there is no gap between the processes, and it is not an easy task to calm down. Ten years of hard work can not keep up with the pace of enterprise development. Properly increasing tool input, freeing production workers from tedious work of sharpening, and focusing on the machine to concentrate on operating the machine is a key step in improving production efficiency.

With the increasingly fierce market competition, the profits of the general machinery processing industry are getting thinner and thinner. Although the positive value brought by CNC cutters far exceeds the cost increase for this purpose, privately-owned enterprises that start their own businesses with scrutiny are still looking forward to maximizing the benefits with minimal consumption. In the premise of meeting the processing requirements, try to choose the low-cost tool. Domestic CNC cutters started relatively late and there are some gaps in high-tech and manufacturing processes, but overall there are obvious advantages: reasonable prices; timely delivery; users can face-to-face exchange experience with tool manufacturers to discuss the use of tools To the confusion and solutions; According to their own intentions to customize a variety of non-standard tools, etc., these advantages are the focus of business concerns. In the precision cutting based on numerical control machine tools, the blank allowance is very small, and the feed amount cannot be released too fast. The main way to increase the production efficiency is high-speed cutting, which is precisely the strength of some coated tools. Chengdu Qianmu, Zhuzhou Diamonds, Xiamen Jinlu and some other high-quality domestically-made knives have undergone turbulent conditions and the market share has greatly improved, winning customers' favor with stable cutting performance. In order to meet user requirements in different industries, manufacturers are also competing to provide quality tools and supporting services. Compared with other famous foreign brands such as Shante, Shanga, Kenner, and Iscar, the most important feature of homemade knives is their high performance-to-price ratio, practicality, and considerate service, representing advanced cutting technology and manufacturing processes in the industry. Domestic tools have a very good market and development space for SMEs in the field of metal processing. More and more users are engaged in technical exchanges and project cooperation with local tool makers to obtain relevant tool solutions in new product development and manufacturing processes. Technical Support.

Domestic tools through the exhibition and technical exchanges, to the user to pass their own advantages of the concept of high-quality and inexpensive cutting tools to improve production efficiency and reduce the total manufacturing costs. Each product has its own processing characteristics and cutting rules, choose tools, do not choose the most expensive, only choose the most practical, suitable for their own is the best. Take YBC252 coated blade of Zhuzhou Diamond Black Diamond series as an example, it is suitable for cutting carbon steel workpieces. Compared with ordinary welding lathes, under the same cutting conditions, the lathe speed of the former can be increased by 50-100, and the dimensional accuracy and surface can be improved. The finish is also significantly improved, and the time for sharpening, loading, and cutting is eliminated. The efficiency of production goes up, the equipment depreciation and management fees are diluted, and the total manufacturing cost is naturally reduced. Similarly, comparing YBC252 coated blades with Sandvik, under the same cutting conditions, the tool life and cutting performance are not much different, but the price can be reduced several times. If the production conditions permit, the use of domestic tools is widely used, which can save A lot of tooling costs, these are the profits of the factory. Some forging blanks and special processes do not need to buy high-priced tools. According to the metal processing experience, in the new product trial process, there are 70 tool damages are caused by a variety of external reasons, the degree of wear is far from the normal life. The superior performance and comprehensive advantages of the tool are calculated as the production efficiency and economic benefits visible to the user. The more clear this account is, the more sufficient the purchasing power of the user is. After the user accepts his own cutting concept, the popularity of the domestic tool is applied. Half the battle.

Close to production, economical and practical is the biggest advantage of domestic tools. There have been many successful cases in the past. In the 1950s, the group of diamonds and 75° powerful turning tools invented by the master mechanics all created a miracle in the history of cutting tools. In the process of designing and manufacturing, homemade knives draw on the advanced technology of the industry and integrate their practical experience into the factory. They have continuously developed special tools that are more adaptable and can solve the problems encountered in the processing process quickly and economically. The listing of each new product will drive cutting technology in related fields to a new level. It is to rely on this concept of starting from the reality and serving the users. The domestic tools continue to accumulate experience in the R&D process and structural innovation, and mutually beneficial and win-win with the users. With efficient and practical cutting technology, the rapid development of the mechanical processing industry is promoted.

Integrating Resources Advantage After bearing steel supermarkets are ready to leave the research center, the Wazhou Group will split the group's procurement business, and a bearing steel supermarket serving the Wafangdian Bearing Industry Cluster is ready to go.

As the vanguard of the industry, Wazhou Group has business relationships with the top five special steel companies in the country and is an important customer of these five steel mills in the bearing industry. Wazhou Group will use this resource advantage to establish a platform to absorb 3 to 5 larger bearing companies in Wafangdian and set up a bearing steel supermarket. Bundled together the purchase of bearing steels from several companies. The procurement volume was greater and more stable. As a bargaining chip, the steel mills discussed a package plan. According to the types and specifications of steel procurement, I will give you a plan. You will give me the goods and settle them if you need them, like a supermarket.

Before that, due to the small purchase volume and insufficient furnace opening conditions, small enterprises around the Wafangdian shop ordered steel mills and waited for some time. After the establishment of a supermarket, it will greatly shorten the delivery period; the purchase price will be reduced, small enterprises will also be able to use high-quality steel, and the grades and reputation of the products will be improved; at the same time, the division of labor within the cluster will be promoted to form an industrial chain; The Wazhou Group's railway lines and venues also solved logistics and warehousing; this put the whole Wafangdian bearing industry together. According to reports, this idea has been supported by the five major steel mills and the municipal government, and is currently advancing vigorously.

The division of marketing is also in progress. The plan has been submitted to the board of directors and passed. Meng Wei said: In the last century, the company was divesting enterprises to run the society in order to reduce the burden. The current round of dismantling the production and industry was designed to increase efficiency. Focusing on improving the competitiveness of enterprises, the transformation and upgrading of the Wazhou Group has just begun.