The products are widely used in large and medium-sized industrial buildings with large spans, such as factory buildings, warehouses, garages, hangars, stadiums, exhibition halls, theaters and other roofs.
The roll-formed single-laminated panel is a occlusal roof panel with high peak height, high strength, no screw-locking bite installation, safe and reliable lap joint installation, waterproof and anti-riot performance.
Moreover, the degree of automation is high, and the engineering cost is low, which is especially suitable for on-site production at the site, thereby reducing costs.
The machine is mainly composed of the discharging machine, the feeding introduction platform, the forming host, the forming shearing device, the hydraulic station, the computer control system, and the finished product bracket.
The optional equipment is equipped with a common discharge machine and a hydraulic discharge machine.
The main technical parameters
1 Installation size: 11000mm × 1200mm × 1500mm
2 Number of molding channels: 15 channels
3 roller material: 45# steel
4 Roller plating thickness: 0.05mm
5 cutter material: Cr12
6 Forming speed: 9-10m/min.
7 electronic control system: industrial computer PLC control
8 Inverter: accurate counting and anti-knife function (optional)
9 host power: 3KW
10 hydraulic station power: 3KW
11 sheet thickness: 0.4-0.6mm
12 plate expansion width: 600mm
Office Furniture,Dining Table,Kitchen Table,Extendable Dining Table,Dining Room Table
FOSHAN CITY LESHUN RONGHUI FURNITURE CO.LTD , https://www.ronghuifurniture.com